Hostname: page-component-586b7cd67f-r5fsc Total loading time: 0 Render date: 2024-11-23T00:41:50.893Z Has data issue: false hasContentIssue false
  • English
  • Français

Triple-Shape Effect of Copolymer Networks Based on Poly(ω-pentadecalactone) and Poly(ε‑caprolactone) Segments Applying a Programming Procedure with an Adjusted Temperature Profile

Published online by Cambridge University Press:  13 February 2012

Jörg Zotzmann ,
M. Behl  and
A. Lendlein
Jörg Zotzmann
Affiliation:
Center for Biomaterial Development and Berlin Brandenburg Center for Regenerative Therapies, Institute of Polymer Research, Helmholtz-Zentrum Geesthacht, Kantstr. 55, 14513 Teltow, Germany
M. Behl
Affiliation:
Center for Biomaterial Development and Berlin Brandenburg Center for Regenerative Therapies, Institute of Polymer Research, Helmholtz-Zentrum Geesthacht, Kantstr. 55, 14513 Teltow, Germany
A. Lendlein
Affiliation:
Center for Biomaterial Development and Berlin Brandenburg Center for Regenerative Therapies, Institute of Polymer Research, Helmholtz-Zentrum Geesthacht, Kantstr. 55, 14513 Teltow, Germany
Get access

Abstract

A triple-shape material based on the two crystallizable segments poly(ω‑pentadeca-lactone) and poly(ε-caprolactone) was synthesized by crosslinking star-shaped precursors. A newly developed programming procedure (TSCP2) was applied in order to achieve triple-shape behavior. The application of this modified triple-shape creation procedure enabled triple-shape capability by influencing the crystallization behavior of the two switching segments in these copolymer networks, which partly show no two distinct and separated melting points. The influence of molecular weight and content of the poly(ε-caprolactone) segment on the triple-shape effect programmed by application of TSCP2 was investigated.

Keywords

polymercrystallinememory
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1403: Symposium V – Multifunctional Polymer-Based Materials , 2012 , mrsf11-1403-v12-49
Copyright
Copyright © Materials Research Society 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Xie, T., Xiao, X.C., and Cheng, Y.T., Macromol. Rapid Commun., 30, 1823 (2009).Google Scholar
2. Behl, M. and Lendlein, A., J. Mater. Chem., 20 (2010).Google Scholar
3. Kolesov, I.S. and Radusch, H.-J., Expr. Polym. Lett., 2, 461 (2008).Google Scholar
4. Luo, X.F. and Mather, P.T., Adv. Funct. Mater., 20, 2649 (2010).Google Scholar
5. Bellin, I., Kelch, S., Langer, R., and Lendlein, A., Proc. Natl. Acad. Sci. USA, 103, 18043 (2006).Google Scholar
6. Bellin, I., Kelch, S., and Lendlein, A., J. Mater. Chem., 17, 2885 (2007).Google Scholar
7. Kumar, U.N., Kratz, K., Wagermaier, W., Behl, M., and Lendlein, A., J. Mater. Chem., 20, 3404 (2010).Google Scholar
8. Li, J.-J. and Xie, T., Macromolecules, 44, 175 (2011).Google Scholar
9. Pretsch, T., Smart Mater. Struct., 19, 015006 (2010).Google Scholar
10. Meng, Q. and Hu, J., Composites A, 40, 1661 (2009).Google Scholar
11. Kim, B.K., Macromol. Symp., 118, 195 (1997).Google Scholar
12. Leng, J., Lan, X., Liu, Y., and Du, S., in Multifunctional Polymer Nanocomposites, edited by Leng, J. and Lau, A.K.-T. (CRC Press, Boca Raton, 2011), pp 47.Google Scholar
13. Sun, L., Huang, W.M., Ding, Z., Zhao, Y., Wang, C.C., Purnawali, H., and Tang, C., Materials & Design, 33, 577 (2012).Google Scholar
14. Zotzmann, J., Behl, M., Feng, Y., and Lendlein, A., Adv. Funct. Mater., 20, 3583 (2010).Google Scholar
15. Zotzmann, J., Behl, M., and Lendlein, A., Macromol. Symp., 309/310, 147 (2011).Google Scholar