Hostname: page-component-cd9895bd7-7cvxr Total loading time: 0 Render date: 2024-12-27T17:52:28.548Z Has data issue: false hasContentIssue false
  • English
  • Français

Using of SILD technology for surface modification of SnO2 films for gas sensor applications

Published online by Cambridge University Press:  11 February 2011

G. Korotcenkov ,
V. Macsanov ,
Y. Boris ,
V. Brinzari ,
V. Tolstoy ,
J. Schwank  and
J. Morante
G. Korotcenkov
Affiliation:
Lab. of Microelectronics, Technical University of Moldova, Bld. Stefan cel Mare, 168, Chisinau, 2004, Rep. of Moldova; Tel.: (373)-2–247143; E-mail: koro@ch.moldpac.md
V. Macsanov
Affiliation:
Lab. of Microelectronics, Technical University of Moldova, Bld. Stefan cel Mare, 168, Chisinau, 2004, Rep. of Moldova; Tel.: (373)-2–247143; E-mail: koro@ch.moldpac.md
Y. Boris
Affiliation:
Lab. of Microelectronics, Technical University of Moldova, Bld. Stefan cel Mare, 168, Chisinau, 2004, Rep. of Moldova; Tel.: (373)-2–247143; E-mail: koro@ch.moldpac.md
V. Brinzari
Affiliation:
Lab. of Microelectronics, Technical University of Moldova, Bld. Stefan cel Mare, 168, Chisinau, 2004, Rep. of Moldova; Tel.: (373)-2–247143; E-mail: koro@ch.moldpac.md
V. Tolstoy
Affiliation:
Dept. of Chemistry, St. Petersburg State University, St. Petersburg, Russia
J. Schwank
Affiliation:
Dept. of Chemical Engineering, University of Michigan, Ann Arbor U.S.
J. Morante
Affiliation:
EME, Dept. d'Electronica, Universitat de Barcelona, Barcelona, Spain.
Get access

Abstract

The possibilities of SILD (successive ionic layer deposition) technology for modification of surface properties of nano-scaled SnO2 films for gas sensor applications were studied and are discussed in this article. Samples of SnO2 with thickness ranging from 30–40 nm were deposited by spray pyrolysis from SnCl4-water solutions. Nano-clusters of Pd and Ag, deposited by the SILD method were applied for surface modification. PdCl2 and AgNO3 were used as precursors for Pd and Ag deposition on the SnO2 surface.

It was found that the method of surface modification by SILD can be used for improving both the sensitivity and the rate of gas response of SnO2-based gas sensors to CO and H2. At the same time, the presence of Pd and Ag clusters on the surface of SnO2 depresses the gas response to ozone.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 750: Symposium Y – Surface Engineering 2002–Synthesis, Characterization and Applications , 2002 , Y5.25
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Yamazoe, N., Sensors and Actuators. B. 5, 7 (1991).Google Scholar
2. Yamazoe, N., Kurokawa, Y., Seiyama, W., Sensors and Actuators. 4, 283 (1983)Google Scholar
3. Lu, F., Chen, S., Peng, S., Sensors and Actuators B.50. 220 (1998).Google Scholar
4. Gopel, W., Schierbaum, K.D.. Sensors and Actuators. B.26–27, 1 (1995).Google Scholar
5. Morimitsu, M., Ozaki, Y., Suzuki, S., Matsunaga, M.. Sensors and Actuators. B. 67, 184 (2000).Google Scholar
6. Cabot, A., Arbiol, J., Morante, J.R., Weimar, U., Barsan, N., Gopel, W., Sensors and Actuators. B. 70, 87 (2000).Google Scholar
7. Korotcenkov, G., Brinzari, V., Schwank, J., Cerneavschi, A., J. Materials Science and Engineering. C. 19(1–2), 73 (2001).Google Scholar
8. Mizsei, J., Sipila, P., Lantto, V., Sensors and Actuators, B 47, 139 (1998).Google Scholar
9. Tolstoy, V.P., Thin Solid Films, 307, 10 (1997)Google Scholar
10. Korotcenkov, G., Brinzari, V., DiBattista, M., Schwank, J., Vasiliev, A., Sensors and Actuators. B.77(1–2), 244 (2001).Google Scholar
11. Brinzari, V., Korotcenkov, G., Golovanov, V.. Thin Solid Films. 391/2, 167 (2001).Google Scholar
12. Brinzari, V., Korotcenkov, G., Schwank, J., Lantto, V., Saukko, S., Golovanov, V., Thin Solid Films 408(1–2), 51 (2002).Google Scholar
13. Zhang, J., Colbow, K., Sensors and Actuators, B. 40, 47 (1997).Google Scholar