Hostname: page-component-586b7cd67f-t7czq Total loading time: 0 Render date: 2024-11-25T18:03:59.819Z Has data issue: false hasContentIssue false

Ba/sr Doped Electrostrictive Compositions for Actuator Design

Published online by Cambridge University Press:  16 February 2011

Zhiqiang Zhuang
Affiliation:
South China University of Technology, Dept. of Inorganic Materials Science and Engineering, Guangzhou, China, 510641
Lijun Jan
Affiliation:
South China University of Technology, Dept. of Inorganic Materials Science and Engineering, Guangzhou, China, 510641
S.B. Kang
Affiliation:
Stevens Institute of Technology, Dept. of Materials Science and Engineering, Hoboken, NJ 07030
B. Gallois
Affiliation:
Stevens Institute of Technology, Dept. of Materials Science and Engineering, Hoboken, NJ 07030
Z. Yang
Affiliation:
South China University of Technology, Dept. of Inorganic Materials Science and Engineering, Guangzhou, China, 510641
H. Du
Affiliation:
Stevens Institute of Technology, Dept. of Materials Science and Engineering, Hoboken, NJ 07030
Get access

Abstract

Solid solutions of lead zirconate titanate (PZT) and lead magnesium niobate (PMN) doped with barium/strontium were developed for use in miniature electrostrictive actuators. The microstructural features of the materials were determined by high-resolution transmission electron microscopy (HREM) and by x-ray diffractometry. The response and the strain hysteresis were measured by applying a sinusoidal or a rectangular voltage pulse. Pulses of variable amplitude and width were applied to the elements to study the switching behavior of 90° domain walls in the materials and to elucidate the initial zero-position “walk off” mechanism. The strain hysteresis or remanent strain of PZT decreased with increasing PMN concentration. A barium-doped PZT (Ba-PZT) composition containing 4 mole% of PMN exhibited ferroelectric relator behavior with a field-induced strain much larger than those of lead magnesium niobate (PMN) electrostrictive materials and a small remanent strain hysteresis.

Type
Research Article
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Damjanovic, D. and Newnham, R.E., J. Intell. Mater. System and Struct., Vol.3, 190208 (1992)Google Scholar
2.Yushin, N.K. in “Choice of electrostrictive Material”;, presented at the 9th international symposium on the Applications of Ferroelectrics, Pennsylvania State University, PA, 1994 (unpublished)Google Scholar
3.Ikeda, T., J Phys. Soc. Japan 14, 168 (1959)Google Scholar
4.Leung, K.M., Liu, S.T and Kyonka, J., Ferroelectrics 27, 41 (1980)Google Scholar
5.Zheng, Jiehui and Zhuang, Zhiqiang, J. South China University of Technology, 21(3), 6367 (1993)Google Scholar