Hostname: page-component-78c5997874-s2hrs Total loading time: 0 Render date: 2024-11-17T20:13:07.920Z Has data issue: false hasContentIssue false
  • English
  • Français

Centrifugaily-Assisted Size Classification and Immobilization of Silicon Crystallites in Gels

Published online by Cambridge University Press:  25 February 2011

D.J. Duval ,
S.H. Risbud ,
Z.A. Munir  and
B.J. Mccoy
D.J. Duval
Affiliation:
University of California, Division of Materials Science and Engineering, Davis, CA 95616
S.H. Risbud
Affiliation:
University of California, Division of Materials Science and Engineering, Davis, CA 95616
Z.A. Munir
Affiliation:
University of California, Division of Materials Science and Engineering, Davis, CA 95616
B.J. Mccoy
Affiliation:
University of California, Department of Chemical Engineering, Davis, CA 95616
Get access

Abstract

Stokes settling in viscous gels was used as a method for classifying mixed powders of silicon crystallites and amorphous silicon; Quantum-size materials derived from porous silicon were encapsulated and trapped in the viscous gels. After complete gelation the matrix retained size gradations developed during Stokes settling, thus yielding a new variant of functionally gradient materials (FGM). Production and rheological properties of the sol and preparation of specimens for centrifuging are discussed. The relative position of particles with various sizes are quantitatively interpreted in relation to the increase in gel viscosity with time.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 298: Symposium B – Silicon-Based Optoelectronic Materials , 1993 , 109
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Liu, LC., Risbud, S.H., in MRS Proceedings, Vol. 272 (1992) pp. 35–39.Google Scholar
2. Hirano, T., Second Symposium for Functionally Gradient Materials, July 1, 1988, Tokyo, The FGM Research Society, Kino Zairyo, Vol. 8 (1988) p. 15.Google Scholar
3. Seki, M., Kino Zairyo, Vol. 8 (1988) p. 7.Google Scholar
4. Igari, T., Notomi, A., Tsunoda, H., Hida, K., Kotoh, T., and Kunishima, S., in Proceedings of the First International Symposium on FGM, Yamanouchi, M., Koizumi, M., Hirai, T., and Shiota, I., editors, 1990, p. 11.Google Scholar
5. Niino, M., Kino Zairyo, Vol. 7 (1987) p. 31.Google Scholar
6. Kawai, T., Miyazaki, S., and Araragi, M., in Proceedings of the First International Symposium on FGM, Yamanouchi, M., Koizumi, M., Hirai, T., and Shiota, I., editors, 1990, p. 191.Google Scholar
7. Yuki, M., Murayama, T., Irisawa, T., Kawasaki, A., and Watanabe, R., in Proceedings of the First International Symposium on FGM, Yamanouchi, M., Koizumi, M., Hirai, T., and Shiota, I., editors, 1990, p. 2032.Google Scholar
8. LaCourse, W.C., Sol-Gel Technology for Thin Films, Fibers, Preforms, Electronics, and Specialty Shapes, Klein, L.C., editor, Noyes Publications (1988) pp. 184–98.Google Scholar