Hostname: page-component-78c5997874-j824f Total loading time: 0 Render date: 2024-11-05T01:17:13.329Z Has data issue: false hasContentIssue false

Fabrication and Properties Analysis of the Thin Walled β''-Alumina Tube

Published online by Cambridge University Press:  12 March 2014

Shimeng Zeng
Affiliation:
Advanced Energy Material Devices Laboratory, Chemical, Engineering, POSTECH
Hwan Kim
Affiliation:
Advanced Energy Material Devices Laboratory, Chemical, Engineering, POSTECH
Jin-Soo Ahn
Affiliation:
Fuel Cell Division, RIST, Pohang, PA 790-784, Republic of Korea
Young-Min Park
Affiliation:
Fuel Cell Division, RIST, Pohang, PA 790-784, Republic of Korea
Nigel Mark Sammes
Affiliation:
Advanced Energy Material Devices Laboratory, Chemical, Engineering, POSTECH
Get access

Abstract

Dense thin β/β’’-alumina electrolyte films of less than 50 μm thickness were fabricated using vacuum dip-coating on porous substrate tubes. The porous substrate tubes were fabricated using a slip casting method. Fine Na-β/β’’-alumina powder was obtained via traditional solid state reaction processing. It was found that vacuum dip-coating is an effective method for fabricating thin dense layers coated on the porous tube. The mechanical properties of the porous tube, with and without the dense layer, were tested using a C-ring method. The optimized sintering process was also studied.

Type
Articles
Copyright
Copyright © Materials Research Society 2014 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Lu, X.C, Xia, G.G, Lemmon, John P., Yang, Z.G, J. Power Sources 195 (2010) 24312442.CrossRefGoogle Scholar
Hirata, Y., Izaiku, T., and Ishihara, Y., J. Mater. Res., Vol. 6, No. 3, Mar (1991).Google Scholar
Sutorik, Anthony C., Neo, Siew Siang, Treadwell, David R., and Laine, Richard M., J. Am. Ceram. Soc., 81 (1998) 14771486.CrossRefGoogle Scholar
Li, Ning, Wen, Z.Y, Liu, Yu, Xu, X.G, Lin, Jiu, Gu, Z.H, J. Eur. Ceram. Soc. 29 (2009) 30313037.CrossRefGoogle Scholar
Noguchia, Yoshinori, Kobayashib, Eiji, Plashnitsab, Larisa S., Okadab, Shigeto, Yamakib, Jun-ichi, Electrochimica Acta 101 (2013) 5965.CrossRefGoogle Scholar
Mali, Amin, Petric, Anthony, J. Eur. Ceram. Soc. 32 (2012) 12291234.CrossRefGoogle Scholar
Mali, Amin, Petric, Anthony, J. Power Sources 196 (2011) 51915196.CrossRefGoogle Scholar
Takao, Yasumasa, Hotta, Tadashi, Nakahira, Kenji, Naito, Makio, Shinohara, Nobuhiro, Okumiya, Masataro, Uematsu, Keizo, J. Eur. Ceram. Soc. 20 (2000) 389395.CrossRefGoogle Scholar
Wei, Xiaoling, Cao, Yin, Lu, Lei, Yang, Hui, Shen, Xiaodong, J. Alloys Compd. 509 (2011) 62226226.CrossRefGoogle Scholar
Ray, A. K. and Subbarao, E. C., Mat. Res. Bull. Vol. 10, 1975, 583590.CrossRefGoogle Scholar
Du, Yanhai, Sammes, N.M., J. Power Sources 136 (2004) 6671.CrossRefGoogle Scholar
Wever, N., Venero, A.F., Am. Ceram. Soc. Bulletin 49 (1970) 491.Google Scholar