Hostname: page-component-cd9895bd7-hc48f Total loading time: 0 Render date: 2024-12-22T21:45:40.378Z Has data issue: false hasContentIssue false
  • English
  • Français

Inkjet-printed quantum dot-based sensor for structural health monitoring

Published online by Cambridge University Press:  28 December 2015

Melinda Hartwig ,
Franz Ortlepp ,
Martin Möbius ,
Jörg Martin ,
Thomas Otto ,
Thomas Geßner  and
Reinhard R. Baumann
Melinda Hartwig
Affiliation:
Technische Universität Chemnitz, Chemnitz, Germany
Franz Ortlepp
Affiliation:
Technische Universität Chemnitz, Chemnitz, Germany
Martin Möbius
Affiliation:
Technische Universität Chemnitz, Chemnitz, Germany
Jörg Martin
Affiliation:
Fraunhofer Institute for Electronic Nano Systems (ENAS), Chemnitz, Germany
Thomas Otto
Affiliation:
Fraunhofer Institute for Electronic Nano Systems (ENAS), Chemnitz, Germany
Thomas Geßner
Affiliation:
Technische Universität Chemnitz, Chemnitz, Germany Fraunhofer Institute for Electronic Nano Systems (ENAS), Chemnitz, Germany
Reinhard R. Baumann
Affiliation:
Technische Universität Chemnitz, Chemnitz, Germany Fraunhofer Institute for Electronic Nano Systems (ENAS), Chemnitz, Germany
Get access

Abstract

A sensor which detects mechanical stresses and stores the position and the strength of these loads by color change of embedded quantum dots (QDs) is presented. The top and bottom electrodes of the sensor are inkjet-printed which leads to a fast and accurate deposition of thin (approx. 50 - 300 nm) and conductive layers. The used silver and poly(3,4-ethylenedioxythio-phene) polystyrene sulfonate (PEDOT:PSS) inks are optimized in terms of printability and opportunities of functionality forming without influencing the active layer of the sensor. The active layer of the sensor is spin-coated and consists of the QDs embedded in semi-conducting poly(9-vinylcarba-zole) (PVK). The hole transport characteristic of PVK and the band level alignment of the used materials ensures the preferred injection of only one type of charge carrier into the QDs. As a result the mechanical stress is visualized by a decreasing in photoluminescence (PL) of the QDs.

Keywords

ink-jet printingluminescencesensor
Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 1788: Symposium V/W/Z/DD/EE – Light-Matter Phenomena―From Atoms to Complex Structures , 2015 , pp. 57 - 62
Copyright
Copyright © Materials Research Society 2015 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Martin, J., Piasta, D., Otto, T., Gessner, T., “Influence of Charges on the Photoluminescence of Semiconductor Nanocrystals” in Proceed. of Smart Systems Integration 2011, Dresden, Germany (2011).Google Scholar
Martin, J., Staudinger, U., Demir, E., Spudat, C., Pötschke, P., Voit, B., Otto, T., Gessner, T., “Nano sensor technology based on semiconductor nanocrystals“, SPIE Photonics West 2012, USA, Proceed. Of SPIE 8264 (2012).Google Scholar
Möbius, M., Martin, J., Poppitz, E. A., Ueberfuhr, P., Tofighi, G., Gordan, O. D., Dzhagan, V. M., Lang, H., Baumann, R. R., Zahn, D. R. T., Otto, T., Gessner, T. and Kroll, L., “Structural health monitoring with quantum dots“ in Proceed. of Smart Systems Integration 2014, Vienna, Austria (2014).Google Scholar
http://www.fujifilmusa.com/shared/bin/DMP-2831_Datasheet.pdf. [17.12.2014]Google Scholar