Article contents
In-Situ Aluminum-Induced Crystallization of Si Thin-Films on Glass Substrates above the Eutectic Temperature using HW-CVD
Published online by Cambridge University Press: 21 March 2011
Abstract
The growth of poly-Si films on glass substrates using an in-situ aluminum-induced crystallization (AIC) process above the Si-Al eutectic temperature of 577°C is discussed. Silicon films were deposited by Hot-Wire Chemical Vapor Deposition (HW-CVD) onto Al coated Corning 7059 glass substrates. The back surface coverage and the average grain size of the films were compared as a function of growth rate and the Si/Al thickness ratio. SEM and EDS analysis of samples with a Si/Al ratio of 1 revealed two domains in the films which varied in morphology and composition; rougher areas containing a mixture of Si and Al with Al content up to 35%, and relatively smoother areas composed of almost entirely Si. This non-uniform morphology seems to be the result of the absence of a native oxide layer when a liquid phase is formed during the deposition. Si grains as large as 50 m m in diameter and back surface coverage up to 90% were obtained for both the Si/Al ratios of 1 and 5. However, no continuous Si films were obtained. The sample with a Si/Al ratio of 1 had columnar grains reaching to the film surface, whereas on the Si/Al ratio of 5 large Si grains did not extend to the film surface.
- Type
- Research Article
- Information
- Copyright
- Copyright © Materials Research Society 2004
References
REFERENCES
- 1
- Cited by