Hostname: page-component-78c5997874-m6dg7 Total loading time: 0 Render date: 2024-11-19T10:40:30.520Z Has data issue: false hasContentIssue false
  • English
  • Français

Preparation and Microstructure Control of Protein Thin Films Deposited by Pulsed Laser Deposition and Via Colloid Chemical Routes

Published online by Cambridge University Press:  01 February 2011

Sayuri Nakayama ,
Ichiro Taketani ,
Sanshiro Nagare  and
Mamoru Senna
Sayuri Nakayama
Affiliation:
Keio University, Faculty of Science and Technology, 3–14–1 Hiyoshi, Kohoku-ku, Yokohama 223–8522, Japan
Ichiro Taketani
Affiliation:
Keio University, Faculty of Science and Technology, 3–14–1 Hiyoshi, Kohoku-ku, Yokohama 223–8522, Japan
Sanshiro Nagare
Affiliation:
Nara Machinery Co., Ltd., 2–5–7 Jonan-jima, Ohta-ku, Tokyo, 143–0002, Japan
Mamoru Senna
Affiliation:
Keio University, Faculty of Science and Technology, 3–14–1 Hiyoshi, Kohoku-ku, Yokohama 223–8522, Japan
Get access

Abstract

Protein thin film (mainly silk fibroin) was prepared by pulsed laser deposition (PLD) with 1064nm IR-beam and via colloid chemical routes. Thickness, surface roughness, and microstructures of the deposited film were examined by quartz crystal microbalance sensor, field emission scanning electron microscope (FE-SEM), and atomic force microscope (AFM). The laser power density was varied systematically for PLD to control the microstructures of the film and the secondary structure (β-sheet, α-helix, or random coil) of the protein. Secondary structure of the target and film was examined by FT-IR. Films prepared by PLD comprise by agglomerated particles with their primary particle size around 30nm. The size of the primary particles was uniform, especially for the film prepared at low laser power density. At low laser power density, proportion of β-sheet increased and that of random coil decreased. Proportion of random coil was also increased by the wet colloidal process. PLD with low power density is most suitable to preserve the secondary structure in the protein thin film.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 788: Symposium L – Continuous Nanophase and Nanostructured Materials , 2003 , L3.22
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCE

[1] Castmer, D.G., Ratner, B.D., Surf. Sci., 500 (2002) 28 Google Scholar
[2] Heimburg, D., Zachariah, S., Heschel, I., Kuhling, H., Schoof, H., Hafemann, B., and Pallua, N., Biomaterials, 22 (2001) 429 Google Scholar
[3] Elliot, J.T., Tona, A., Woodward, J.T., Jones, P.L., and Plant, A.L., Langmuir, 19 (2002) 1506 Google Scholar
[4] Tsuboi, Y., Goto, M., and Itaya, A., Chem. Lett. (1998) 521 Google Scholar
[5] Tsuboi, Y., Goto, M., and Itaya, A., J. Appl. Phys., 89 (2001) 7917 Google Scholar
[6] Tsuboi, Y., Ikejiri, T., Shiga, S., Yamada, K., and Itaya, A., Appl. Phys. A, 73 (2001) 637 Google Scholar
[7] Tsuboi, Y., Adachi, H., Yamada, K., Miyasaka, H., and Itaya, A., Jpn. J. Appl. Phys., 41 (2002) 4772 Google Scholar
[8] Furuhata, K., Okada, A., Chen, Y., Xu, YY., and Sakamoto, M., J. Seric. Sci. Jpn., 63 (1994) 315 Google Scholar
[9] Lichtenwalner, D.J., Auciello, O., Dat, R., and Kingon, A.I., J. Appl. Phys. 74 (1993) 7497 Google Scholar