Hostname: page-component-78c5997874-94fs2 Total loading time: 0 Render date: 2024-11-18T08:53:44.598Z Has data issue: false hasContentIssue false
  • English
  • Français

Real-Time Studies of The Electrocrystallization of Nanoscale Ceramic Superlattices

Published online by Cambridge University Press:  15 February 2011

Teresa D. Golden ,
Richard J. Phillips  and
Jay A. Switzer
Teresa D. Golden
Affiliation:
Graduate Center for Materials Research, University of Missouri - Rolla, Rolla, Missouri, 65401
Richard J. Phillips
Affiliation:
Graduate Center for Materials Research, University of Missouri - Rolla, Rolla, Missouri, 65401
Jay A. Switzer
Affiliation:
Graduate Center for Materials Research, University of Missouri - Rolla, Rolla, Missouri, 65401
Get access

Abstract

Electrodeposition is unique among thin film deposition techniques, since the current following a potential step from open circuit to a given overpotential (i.e., driving force) provides a real-time, in situ probe of the deposition process. We have used current-time transients to determine the kinetics and dimensionality of growth, and to calculatethe composition profiles of electrodeposited superlattices in the Pb-TI-O system. The transients are indicative of 2D growth, and the height of the 2D monolayer depends on the orientation of the film. A [100] oriented film has a step height of 0.13 nm and a [210] oriented film has a step height of 0.18 nm. These heights correspond to the (400) and (220) d-spacings, respectively. Using a Cottrell analysis, we were able to both calculate and tailor the composition profile in these superlattices. Superlattices grown by pulsing between 70 and 150 mV have square profiles, while those grown by pulsing between 70 and 230 mV have graded profiles.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 382: Symposium G – Structure and Properties of Multilayered Thin Films , 1995 , 123
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Tench, D. and White, J., Metall. Trans. A 15, 2039 (1984).Google Scholar
2. Switzer, J. A., Shane, M. J., and Phillips, R. J., Science 247, 444 (1990).Google Scholar
3. Switzer, J. A. and Golden, T. D., Adv. Mater. 5, 474 (1993).Google Scholar
4. Golden, T. D., Raffaelle, R. P., and Switzer, J. A., Appl. Phys. Lett. 63, 1501 (1993).Google Scholar
5. Switzer, J. A., Hung, C. -J., Breyfogle, B. E., Shumsky, M. G., Leeuwen, R. Van, and Golden, T. D., Science 264, 1573 (1994).Google Scholar
6. Lashmore, D. S. and Dariel, M. P., J. Electrochem. Soc. 135, 1218 (1988).Google Scholar
7. Ross, C. A., Annu. Rev. Mater. Sci. 24, 159 (1994).Google Scholar
8. Feenstra, R. M., Collins, D. A., Ting, D. Z. -Y., Wang, M. W., and McGill, T. C., J. Vac. Sci. Technol. B 12, 2592 (1994).Google Scholar
9. Switzer, J. A., Raffaelle, R. P., Phillips, R. J., Hung, C. -J., and Golden, T. D., Science 258, 1918 (1992).Google Scholar
10. Phillips, R. J., Shane, M. J., and Switzer, J. A., J. Mater. Res. 4, 923 (1989).Google Scholar
11. Switzer, J. A., Phillips, R. J., and Golden, T. D., Appl. Phys. Lett. 66, 819 (1995).Google Scholar
12. MacDonald, D. D., in Transient Techniques in Electrochemistry, (Plenum Press, 1977), Ch. 8.Google Scholar