Hostname: page-component-5c6d5d7d68-sv6ng Total loading time: 0 Render date: 2024-08-16T13:25:57.588Z Has data issue: false hasContentIssue false

Characterization of hydroxyl-bearing magnesium fluoride containing physically bound water

Published online by Cambridge University Press:  05 March 2012

J. L. Booster*
Affiliation:
Delft University of Technology, Applied Earth Sciences, Department of Raw Materials Technology, Mijnbouwstraat 120, 2628 RX, Delft, The Netherlands
J. H. L. Voncken
Affiliation:
Delft University of Technology, Applied Earth Sciences, Department of Raw Materials Technology, Mijnbouwstraat 120, 2628 RX, Delft, The Netherlands
A. van Sandwijk
Affiliation:
Delft University of Technology, Applied Earth Sciences, Department of Raw Materials Technology, Mijnbouwstraat 120, 2628 RX, Delft, The Netherlands
M. A. Reuter
Affiliation:
Delft University of Technology, Applied Earth Sciences, Department of Raw Materials Technology, Mijnbouwstraat 120, 2628 RX, Delft, The Netherlands
*
a)Electronic mail: J.L.Booster@ta.tudelft.nl

Abstract

Most electrolytic zinc plants have to deal with dissolved magnesium in their process liquors, as zinc sulphide concentrates contain small amounts of magnesium. Applied magnesium bleed methods are generally expensive and environmentally unfriendly. Recently, a new approach was suggested and discussed, which involves selective magnesium fluoride precipitation from purified zinc sulphate solutions. X-ray fluorescence measurements of these precipitates indicated that the ratio Mg:F is not 1:2 as would be expected if the precipitate was MgF2, which should be formed on a theoretical basis. It was inferred that fluoride was partly substituted by hydroxyl groups. Analytical techniques such as infrared absorption spectrometry, X-ray diffraction, and thermogravimetry were combined in order to verify this hypothesis. The precipitate indeed appeared to be a magnesium fluoro- hydroxide compound containing physically bound water. The results contribute to the understanding of the required operating conditions of the proposed process.

Type
Technical Articles
Copyright
Copyright © Cambridge University Press 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Booster, J.L., van Sandwijk, A., and Reuter, M.A. (2000). “Magnesium removal in the electrolytic zinc industry,” Minerals Eng. MENGEB 13, No. 5, 517526. 9tj, MENGEB Google Scholar
Burnham, C.W. (1991) “Least squares refinement of crystallographic lattice parameters,” Program, LCLSQ 8.4., Department of Earth and Planetary Sciences, Harvard University.Google Scholar
Crane, R.I., and Ehlers, E.G. (1969). “The system MgF2–MgO–H2O,Am. J. Sci. AJSCAP 267, 11051111. amj, AJSCAP CrossRefGoogle Scholar
Grant, R.M. (1993), “Zinc concentrate and processing trends,” in World Zinc ’93, edited by I. G. Matthew (The Australasian Institute of Mining and Metallurgy, 1993), pp. 391–397.Google Scholar
Nancollas, G.H., Bochner, R.A., Liolios, E., Shyu, L.J., Yoshikawa, Y., Barone, J.P., and Svrjcek, D. (1982). “The kinetics of crystal growth of divalent metal fluorides,” ALChE Symp. Ser. ACSSCQ 78, 2632.Google Scholar
Shannon, R.D. (1976). “Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides,” Acta Crystallogr., Sect. A: Cryst. Phys., Diffr., Theor. Gen. Crystallogr. ACACBN A32, 751767. aca, ACACBN Google Scholar
Yoshikawa, Y., and Nancollas, G.H. (1983). “The kinetics of crystal growth of magnesium fluoride,” J. Cryst. Growth JCRGAE 64, 222–22. jcr, JCRGAE Google Scholar