Hostname: page-component-cd9895bd7-hc48f Total loading time: 0 Render date: 2024-12-27T00:02:45.556Z Has data issue: false hasContentIssue false

A collision result for both non-Newtonian and heat conducting Newtonian compressible fluids

Published online by Cambridge University Press:  26 February 2024

Šárka Nečasová
Affiliation:
Institute of Mathematics, Czech Academy of Sciences, Žitná 25, 115 67 Praha 1, Czech Republic (matus@math.cas.cz; oschmann@math.cas.cz)
Florian Oschmann
Affiliation:
Institute of Mathematics, Czech Academy of Sciences, Žitná 25, 115 67 Praha 1, Czech Republic (matus@math.cas.cz; oschmann@math.cas.cz)
Rights & Permissions [Opens in a new window]

Abstract

We generalize the known collision results for a solid in a 3D compressible Newtonian fluid to compressible non-Newtonian ones, and to Newtonian fluids with temperature-depending viscosities.

Type
Research Article
Copyright
Copyright © The Author(s), 2024. Published by Cambridge University Press on behalf of The Royal Society of Edinburgh

1. Introduction

We consider the compressible Navier–Stokes equations governing the motion of a fluid in some bounded domain $\Omega \subset \mathbb {R}^3$, where we additionally insert a simply connected compact obstacle $\mathcal {B} \subset \mathbb {R}^3$. Denoting $\mathcal {F} = \Omega \setminus \mathcal {B}$ the fluid's domain, the equations take the form

(1.1)\begin{equation} \begin{cases} \partial_t \rho + \operatorname{\mathrm{div}}(\rho \mathbf{u}) = 0 & \text{in } \mathcal{F},\\ \partial_t(\rho \mathbf{u}) + \operatorname{\mathrm{div}}(\rho \mathbf{u} \otimes \mathbf{u}) - \operatorname{\mathrm{div}} \mathbb{S} + \nabla p = \rho \mathbf{f} & \text{in } \mathcal{F},\\ m \ddot{\mathbf{G}}(t) ={-}\int_{\partial \mathcal{B}} (\mathbb{S} - p\mathbb{I}) \mathbf{n} \ \mathrm{d} \sigma + \int_\mathcal{B} \rho_\mathcal{B} \mathbf{f} \ \mathrm{d} x & \text{in } \mathcal{F},\\ \frac{\rm d}{{\rm d} t}(\mathbb{J} \omega) ={-}\int_{\partial \mathcal{B}} (x-\mathbf{G}) \times (\mathbb{S} - p\mathbb{I})\mathbf{n} \ \mathrm{d} \sigma + \int_\mathcal{B} (x-\mathbf{G}) \times \rho_\mathcal{B} \mathbf{f} \ \mathrm{d} x & \text{in } \mathcal{F},\\ \mathbf{u} = \dot{\mathbf{G}}(t) + \omega(t) \times (x - \mathbf{G}(t)) & \text{on } \partial \mathcal{B},\\ \mathbf{u} = 0 & \text{on } \partial \Omega,\\ \rho(0,\cdot) = \rho_0, \ (\rho \mathbf{u})(0,\cdot) = \mathbf{m}_0, \ \mathbf{G}(0) = \mathbf{G}_0, \ \dot{\mathbf{G}}(0) = \mathbf{V}_0, \ \omega(0) = \omega_0 & \text{in } \mathcal{F}(0). \end{cases} \end{equation}

Here, $\rho$ and $\mathbf {u}$ denote the fluid's density and velocity, respectively, $p$ is the fluid's pressure given by $p(\rho )=\rho ^\gamma$ for some $\gamma > 3/2$, $\mathbb {S}$ the (viscous) stress tensor and $\mathbf {f} \in L^\infty ((0,\,T) \times \Omega )$ a given external force density. Furthermore, $\rho _\mathcal {B}$ is the solid's density, $\mathbf {G}$ the centre of mass of the body $\mathcal {B}$, $\omega$ its rotational velocity, $m>0$ the object's mass given by

\[ m=\int_\mathcal{B} \rho_\mathcal{B} \ \mathrm{d} x, \]

and $\mathbb {J}$ is the inertial tensor (moment of inertia) given by

\[ \mathbb{J}=\int_\mathcal{B} \rho_\mathcal{B} \big( |x-\mathbf{G}|^2 \mathbb{I} - (x-\mathbf{G})\otimes (x-\mathbf{G}) \big) \ \mathrm{d} x. \]

The question of whether or not a solid body collides with its container has been addressed by several authors. Without claiming completeness, we refer to [Reference Gérard-Varet and Hillairet9Reference Jin, Nečasová, Oschmann and Roy14] for recent results in this direction. The aim of this short note is to generalize these results to non-Newtonian fluids, as well as to heat-conducting fluids with temperature-growing viscosities. Lastly, let us also mention the related, though different, work [Reference Feireisl and Nečasová6], where the authors considered a so-called $k$- or multi-polar compressible fluid, and showed that collisions do not occur for $k\geq 3$ since the velocity and, accordingly, the density enjoy higher regularity. Together with the no-collision results given in the references above, this can be roughly summarized as ‘high regularity forbids collision’.

Notations:. Lebesgue and Sobolev spaces will be denoted in the usual way as $L^p(\Omega )$ and $W^{1,p}(\Omega )$, respectively. We will also denote them for vector- and matrix-valued functions as in the scalar case, that is, $L^p(\Omega )$ instead of $L^p(\Omega ; \mathbb {R}^3)$. The Sobolev space of trace-zero functions will be denoted by $W_0^{1,p}(\Omega )$. For each $\mathbb {A},\,\mathbb {B} \in \mathbb {R}^{3 \times 3}$, we set the Frobenius inner product $\mathbb {A}: \mathbb {B} = \sum _{i,j=1}^3 A_{ij} B_{ij}$. Further, we define the Frobenius norm by $|\mathbb {A}|^2 = \mathbb {A} : \mathbb {A}$. To lean the notation, we will write $a \lesssim b$ if there is a generic constant $C>0$ which is independent of $a$, $b$, and the variables of interest such that $a \leq C b$. The constant might change its value wherever it occurs. The domains occupied by the solid and fluid at time $t \geq 0$ are denoted by $\mathcal {B}(t)$ and $\mathcal {F}(t)=\Omega \setminus \mathcal {B}(t)$, respectively.

2. General assumptions

Let us start by making precise the assumptions on the fluid and solid. First, the stress tensor $\mathbb {S}$ will depend on the symmetrized velocity gradient $\mathbb {D}(\mathbf {u})=1/2 ( \nabla \mathbf {u} + \nabla ^T \mathbf {u})$ in a way described in (S1)–(S3) below. Second, we assume that the solid is homogeneous with constant mass density $\rho _\mathcal {B}>0$. The mass and centre of mass of the rigid body are given by

\[ m=\rho_\mathcal{B}|\mathcal{B}(0)|, \quad \mathbf{G}(t)=\frac{1}{m}\int_{\mathcal{B}(t)}\rho_\mathcal{B} x \ \mathrm{d} x. \]

We will also assume that the solid's mass is independent of time, that is, $m=\rho _\mathcal {B} |\mathcal {B}(t)|$ for any $t\geq 0$, leading to the density-independent expression $\mathbf {G}(t) = |\mathcal {B}(t)|^{-1} \int _{\mathcal {B}(t)} x \ \mathrm {d} x$.

2.1. The stress tensor and uniform bounds

The crucial part in analysing collisions is to investigate the form of the stress tensor $\mathbb {S}$. We will make the following assumptions:

  1. (S1) Continuity: $\mathbb {S}$ is a continuous mapping from $\mathbb {R}_{\rm sym}^{3\times 3}$ to itself depending only on the symmetric gradient $\mathbb {D}(\mathbf {u}) = 1/2 (\nabla \mathbf {u} + \nabla ^T \mathbf {u}) \in \mathbb {R}_{\rm sym}^{3 \times 3}$.

  2. (S2) Monotonicity: For any $\mathbb {M},\, \mathbb {N} \in \mathbb {R}_{\rm sym}^{3 \times 3}$, we have $[\mathbb {S}(\mathbb {M}) - \mathbb {S}(\mathbb {N})] : (\mathbb {M} - \mathbb {N}) \geq 0$.

  3. (S3) Growth: There are absolute constants $\delta \geq 0$ and $0< c_0\leq c_1<\infty$ such that for some $p>1$ and all $\mathbb {M} \in \mathbb {R}_{\rm sym}^{3\times 3}$, we have $c_0 |\mathbb {M}|^p - \delta \leq \mathbb {S}(\mathbb {M}):\mathbb {M} \leq c_1 |\mathbb {M}|^p$.

We note that classical power-law fluids like $\mathbb {S} = |\mathbb {D}(\mathbf {u})|^{p-2} \mathbb {D}(\mathbf {u})$, but also so-called activated Euler fluids with $\mathbb {S}=\max \{|\mathbb {D}(\mathbf {u})|-\delta _0,\, 0\}|\mathbb {D}(\mathbf {u})|^{-1} \mathbb {D}(\mathbf {u})$ for some $\delta _0>0$ fit into this setting. In contrast to the fact that we do not consider temperature in here, we will give another example of temperature-growing viscosities in § 4. Note moreover that condition (S3) implies by duality $\mathbb {S} \in L^{p'}((0,\,T)\times \Omega )$ since

(2.1)\begin{equation} \begin{aligned} \|\mathbb{S}\|_{L^{p'}((0,T)\times \Omega)} & = \sup_{\|\mathbb{M}\|_{L^p((0,T) \times \Omega)} \leq 1} \int_0^T \int_\Omega \mathbb{S} : \mathbb{M} \ \mathrm{d} x \ \mathrm{d} t \\ & \leq c_1 \sup_{\|\mathbb{M}\|_{L^p((0,T) \times \Omega)} \leq 1} \int_0^T \int_\Omega |\mathbb{M}|^p \ \mathrm{d} x \ \mathrm{d} t \leq c_1. \end{aligned} \end{equation}

Remark 2.1 We remark that the question of existence of a weak solution to problem (1.1) is just solved in some special cases, see [Reference Feireisl3] for Newtonian fluids, and [Reference Feireisl, Liao and Malek5] for a special non-Newtonian fluid with bounded divergence of the velocity. On the other hand, for non-Newtonian incompressible fluids, existence is shown in [Reference Feireisl, Hillairet and Nečasová4], and in [Reference Nečasová15] for incompressible heat-conducting fluids. In those two existence results, collisions cannot occur due to a high regularity of the velocity, in particular, $p \geq 4$ there.

To start analysing the collision behaviour, one first needs uniform bounds on the velocity and density. With a slight abuse of notation, we extend the velocity and density as

\[ \rho = \begin{cases} \rho & \text{in } \mathcal{F},\\ \rho_\mathcal{B} & \text{in } \mathcal{B}, \end{cases} \qquad \qquad \mathbf{u} = \begin{cases} \mathbf{u} & \text{in } \mathcal{F},\\ \dot{\mathbf{G}}(t) + \omega(t)\times (x-\mathbf{G}(t)) & \text{in } \mathcal{B}. \end{cases} \]

Noticing that the energy inequality obtained in [Reference Feireisl, Liao and Malek5] implies in our case

\[ \bigg[ \int_\Omega \frac12 \rho |\mathbf{u}|^2 + \frac{\rho^\gamma}{\gamma-1} \ \mathrm{d} x \bigg]_{t=0}^{t=\tau} + \int_0^\tau \int_\Omega \mathbb{S} : \mathbb{D}(\mathbf{u}) \ \mathrm{d} x \ \mathrm{d} t \leq \int_0^\tau \int_\Omega \rho \mathbf{f} \cdot \mathbf{u} \ \mathrm{d} x \ \mathrm{d} t \]

for almost any $\tau \in [0,\,T]$, an immediate consequence is the uniform estimate

(2.2)\begin{equation} \gamma>\frac32, \quad \|\rho\|_{L^\infty(0,T;L^\gamma(\mathcal{F}({\cdot})))}^\gamma + \|\mathbf{u}\|_{L^p(0,T;W_0^{1,p}(\Omega))}^p + \|\rho |\mathbf{u}|^2\|_{L^\infty(0,T;L^1(\Omega))} \lesssim E_0 + 1. \end{equation}

Here, $E_0$ is the initial energy of the system given by

(2.3)\begin{equation} E_0 = \int_{\mathcal{F}(0)} \frac{|\mathbf{m}_0|^2}{2\rho_0} + \frac{\rho_0^\gamma}{\gamma-1} \ \mathrm{d} x + \frac{m}{2} |\mathbf{V}_0|^2 + \frac12 \mathbb{J}(0)\omega_0 \cdot \omega_0, \end{equation}

and the ‘$+1$’ on the right-hand side of (2.2) is a sole remainder of the force $\mathbf {f}$ on the right-hand side of (1.1)$_2$. Moreover, the implicit constant appearing in (2.2) is independent of the mass $m$ and the final time $T$.

We remark that such bounds also hold true for other models of non-Newtonian fluids such as dissipative (measure-valued) solutions, see [Reference Abbatiello and Feireisl1]. However, the additional Reynolds stress appearing in the momentum equation for such type of solutions is not regular enough for our purposes, in particular, we need to work with weak solutions rather than dissipative ones. Since the present work does not focus on existence of weak solutions, for the definition of such we refer the reader to [Reference Feireisl, Liao and Malek5].

2.2. The solid's shape and main result

Throughout the paper, we consider a $C^{1,\alpha }$ solid moving vertically over a flat horizontal surface under the influence of gravity. More precisely, we make the following assumptions (see figure 1 for the main notations):

  1. (A1) The source term is provided by the gravitational force ${\mathbf {f}}=-g{\mathbf {e}}_3$ and $g>0$.

  2. (A2) The solid moves along and is symmetric to the $x_3$-axis $\{x_1=x_2=0\}$.

  3. (A3) The only possible collision point is at $x=0 \in \partial \Omega$, and the solid's motion is a vertical translation.

  4. (A4) Near $r=0$, $\partial \Omega$ is flat and horizontal, where $r=\sqrt {x_1^2+x_2^2}$.

  5. (A5) Near $r=0$, the lower part of $\partial \mathcal {B}(t)$ is given by

    \[ x_3={ h(t)+r^{1+\alpha}},\ r\leq 2r_0\text{ for some small enough } r_0>0. \]
  6. (A6) The collision just happens near the flat boundary of $\Omega$:

    \[ \inf_{t > 0}{\rm dist} \left(\mathcal{B}(t),\partial\Omega \setminus [{-}2r_0, 2r_0]^2\times\{0\}\right)\geq d_0>0. \]

Figure 1. The body $\mathcal {B}$ and fluid $\mathcal {F}$ in the container $\Omega$.

By (A2) and (A3), we may additionally assume that the position of the solid is characterized by its height $h(t)$, in the sense that

\[ \mathbf{G}(t) = \mathbf{G}(0)+(h(t)-h(0)) \mathbf{e}_3 \quad \text{and} \quad \mathcal{B}(t)=\mathcal{B}(0)+(h(t)-h(0)) \mathbf{e}_3. \]

Note especially that this means that the solid rotates at most around the $x_3$-axis, and so $\omega (t) = \pm |\omega (t)| \mathbf {e}_3$. This assumption can be made rigorous for Newtonian incompressible fluids and symmetric initial data in 2D, see [Reference Gérard-Varet and Hillairet9].

Our main result regarding collision now reads as follows:

Theorem 2.2 Let $\gamma >{3}/{2}$, $2 \leq p < 3$, $0<\alpha \leq 1$, and $\Omega,\,\ \mathcal {B}\subset \mathbb {R}^3$ be bounded domains of class $C^{1,\alpha }$. Let $(\rho,\, \mathbf {u},\, {\mathbf {G}})$ be a weak solution to (1.1) enjoying the bounds (2.2), let $\mathbb {S}$ comply with (S1)–(S3) and assume that (A1)–(A6) are fulfilled. If the solid's mass is large enough, and its initial vertical and rotational velocities are small enough, then the solid touches $\partial \Omega$ in finite time provided

(2.4)\begin{equation} \begin{aligned} & \alpha<\min \bigg\{ \frac{3-p}{2p-1}, \frac{3(4p\gamma - 3p - 6\gamma)}{p\gamma + 3p + 6\gamma} \bigg\} \quad \text{with}\\ & \frac32< \gamma \leq 3, \ \frac{6\gamma}{4\gamma-3} < p < 3, \quad \text{or} \quad \gamma>3, \ 2 \leq p < 3. \end{aligned} \end{equation}

Remark 2.3 The terms ‘large enough’ and ‘small enough’ should be interpreted in such a way that inequality (3.8) is satisfied. More precisely, for some constant $C_0>0$ which is independent of $m$ and $T$, we ensure collision provided

\[ C_0 \max\{m^{{-}1/2}, m^{{-}3/2} \} \bigg(1 + E_0^{\frac{1}{2} + \frac{1}{\gamma} + \frac{1}{p}} \bigg) < 1. \]

Remark 2.4 Let us mention a few facts about the above constraints. First, the two expressions inside the minimum stem, as one shall expect, from estimating the diffusive and convective part, respectively.

Second, the restriction $p<3$ is due to the diffusive part, see the estimate of $I_4$ in § 3.2. Moreover, the requirement $p\geq 2$ stems from the convective term, since we need to estimate the square of the velocity in time. Thus, our result as stated above is just valid for shear-thickening fluids. Omitting convection, theorem 2.2 still holds provided

(2.5)\begin{equation} \gamma>\frac32, \ \frac{\gamma}{\gamma-1}< p<3, \quad \alpha<\min \bigg\{ \frac{3-p}{2p-1}, \frac{9(p\gamma - p - \gamma)}{2p\gamma + 3p + 3\gamma} \bigg\}, \end{equation}

hence also allowing for shear-shinning fluids if $\gamma >2$.

Third, the first condition on $p$ and $\gamma$ in (2.4) can be equivalently stated as ${3p}/{(4p-6)} < \gamma \leq 3$, $2< p<3$.

Lastly, the first fraction inside the minimum in (2.4) wins precisely if $\gamma \geq {3p}/{(5p-9)}$, and in (2.5) if $\gamma \geq {3p}/{(4p-6)}$. This seems to be optimal in the sense that for $p=2$, $\alpha =1/3$ is a ‘borderline value’ for the incompressible case, which would (loosely speaking) correspond to $\gamma =\infty$ (see [Reference Gérard-Varet and Hillairet10, Section 3.1] for details). Moreover, the assumptions in (2.4) coincide with the requirements on $\alpha$ and $\gamma$ made in [Reference Jin, Nečasová, Oschmann and Roy14], where the compressible Newtonian case (corresponding to $p=2$) was considered.

Remark 2.5 As will be immediate from the calculations, the same conclusion holds for non-Newtonian heat-conducting fluids such that assumptions (S1)–(S3) are replaced by

  1. (S1’) Continuity: $\mathbb {S}$ is a continuous mapping from $(0,\,\infty ) \times \mathbb {R}_{\rm sym}^{3\times 3}$ to $\mathbb {R}_{\rm sym}^{3 \times 3}$ depending continuously on the temperature $\vartheta >0$ and the symmetric gradient $\mathbb {D}(\mathbf {u}) = 1/2 (\nabla \mathbf {u} + \nabla ^T \mathbf {u}) \in \mathbb {R}_{\rm sym}^{3 \times 3}$.

  2. (S2’) Monotonicity: For any $\vartheta \in (0,\,\infty )$ and any $\mathbb {M},\, \mathbb {N} \in \mathbb {R}_{\rm sym}^{3 \times 3}$, we have $[\mathbb {S}(\vartheta,\, \mathbb {M}) - \mathbb {S}(\vartheta,\, \mathbb {N})] : (\mathbb {M} - \mathbb {N}) \geq 0$.

  3. (S3’) Growth: There are absolute constants $\delta \geq 0$ and $0< c_0\leq c_1<\infty$ such that for some $p>1$, all $\vartheta >0$, and all $\mathbb {M} \in \mathbb {R}_{\rm sym}^{3\times 3}$, we have $c_0 |\mathbb {M}|^p - \delta \leq \mathbb {S}(\vartheta,\, \mathbb {M}):\mathbb {M} \leq c_1 |\mathbb {M}|^p$.

3. Construction of test function and proof of main result

In this section, we will define an appropriate test function for the momentum equation that will ensure collision. Let $(\rho,\, \mathbf {u},\, {\mathbf {G}})$ be a weak solution of (1.1) satisfying assumptions (A1)–(A6) in the time interval $(0,\,T_*)$ before collision and enjoying the bounds (2.2). From now on we denote $\mathcal {B}_h=\mathcal {B}_h(t)=\mathcal {B}(0)+(h(t)-h(0)){\mathbf {e}}_3$ and $\mathcal {F}_{h}=\mathcal {F}_h(t)=\Omega \setminus \mathcal {B}_h(t)$. As mentioned before, the assumption on $\mathcal {B}(t)$ especially means that the whole configuration is cylindrically symmetric with respect to the $x_3$-axis.

Collision can occur if and only if $\lim _{t\to T_*}h(t)=0$. Note further that ${\rm dist}(\mathcal {B}_h(t),\,\partial \Omega )= \min \{h(t),\,d_0\}$ by assumptions (A2) and (A6).

3.1. Test function

We will make use of cylindrical coordinates $(r,\,\theta,\,x_3)$ with the standard basis $(\mathbf {e}_r,\, \mathbf {e}_\theta,\, \mathbf {e}_3)$. We take the same function as in [Reference Gérard-Varet and Hillairet10] (see also [Reference Gérard-Varet and Hillairet9, Reference Gérard-Varet, Hillairet and Wang12]), which is constructed as a function ${\mathbf {w}}_h$ associated with the solid particle $\mathcal {B}_h$ frozen at distance $h$. This function will be defined for $h\in (0,\,\sup _{t\in [0,T_*)}h(t))$. We see that when $h\to 0$, a cusp arises in $\mathcal {F}_h$, which is contained in

(3.1)\begin{equation} \Omega_{h,r_0}=\{ x \in \mathcal{F}_h: 0\leq r< r_0,\ 0\leq x_3\leq h+r^{1+\alpha},\ r^2=x_1^2+x_2^2\}. \end{equation}

For the sequel, we fix $h$ as a (small) positive constant and define $\psi (r):= h+r^{1+\alpha }$. Note that the common boundary $\partial \Omega _{h,r_0}\cap \partial \mathcal {B}_h$ is precisely given by the set $\{0\leq r\leq r_0,\,\ x_3=\psi (r)\}$.

Let us derive how an appropriate test function inside $\Omega _{h, r_0}$ might look like. In order to get rid of the pressure term, we seek for a function $\mathbf {w}_h$ which is divergence-free. Additionally, it shall be rigid on $\mathcal {B}_h$, and comply with its motion. Thus, our test function shall satisfy

\[ \mathbf{w}_h |_{\mathcal{B}_h} = \mathbf{e}_3, \quad \mathbf{w}_h |_{\partial \Omega} = 0, \quad \operatorname{\mathrm{div}} \mathbf{w}_h = 0, \]

hence we choose $\mathbf {w}_h = \nabla \times (\phi _h \mathbf {e}_\theta )$ for some function $\phi _h(r,\,x_3)$ to be determined. In cylindrical coordinates, we write $\mathbf {w}_h$ as

(3.2)\begin{equation} \mathbf{w}_h={-}\partial_3\phi_h \mathbf{e}_r+\frac1r \partial_r(r\phi_h)\mathbf{e}_3. \end{equation}

The boundary conditions on $\mathbf {w}_h$ translate for $\phi _h$ into

\begin{align*} \partial_3 \phi_h(r, 0) = 0,& & \frac1r \partial_r (r \phi_h)(r, 0)=0,\\ \partial_3 \phi_h(r, \psi(r)) = 0& & \frac1r \partial_r (r \phi_h)(r, \psi(r)) = 1. \end{align*}

Further, considering the energy

\[ \mathcal{E}=\int_{\mathcal{F}_h} |\nabla \mathbf{w}_h|^2 \ \mathrm{d} x \]

and anticipating that most of it stems from the vertical motion, that is, from the derivative in $x_3$-direction, we get

\[ \mathcal{E}\sim \int_{\mathcal{F}_h} |\partial_3^2 \phi_h|^2 \ \mathrm{d} x. \]

The Euler–Lagrange equation for the functional $\mathcal {E}$ thus reads $\partial _3^4 \phi _h(r,\, x_3)=0$. A simple calculation now leads to the general form

\[ \phi_h(r, x_3) ={-}\frac32 \bigg( \frac{\kappa_1}{r} - r \bigg) \bigg(\frac{x_3}{\psi(r)} \bigg)^2 + \bigg( \frac{\kappa_1}{r} - r \bigg) \bigg(\frac{x_3}{\psi(r)}\bigg)^3 + \frac{\kappa_2}{r}, \quad \kappa_1, \kappa_2 \in \mathbb{R}. \]

In order to get a smooth bounded function $\phi _h$ for all values of $r$ and $x_3$, we choose $\kappa _1=\kappa _2=0$ to infer

\[ \phi_h(r, x_3) = \frac{r}{2} \Phi \bigg( \frac{x_3}{\psi(r)} \bigg), \quad \Phi(t) = t^2(3-2t). \]

Hence, inside $\Omega _{h, r_0}$, the so constructed function will take advantage of the precise form of the solid. Extending $\phi _h$ in a proper way, we thus can define a proper test function $\mathbf {w}_h$ defined in the whole of $\Omega$.

To achieve this, we use a similar method as in [Reference Gérard-Varet and Hillairet9]: define smooth functions $\chi,\, \eta$ satisfying

\begin{align*} & \chi=1 \text{ on } ({-}r_0,r_0)^2 \times (0,r_0),& & \chi=0 \text{ on } \Omega\setminus \big( ({-}2r_0, 2r_0)^2 \times (0, 2r_0) \big), \\ & \eta=1 \text{ on } \mathcal{N}_{d_0/2},& & \eta=0 \text{ on } \Omega \setminus \mathcal{N}_{d_0}, \end{align*}

where $d_0>0$ is as in (A6), and $\mathcal {N}_\delta$ is a $\delta$-neighbourhood of $\mathcal {B}(0)$. With a slight abuse of notation for $\phi _h$, set

(3.3)\begin{equation} \phi_h(r,x_3)= \frac{r}{2} \begin{cases} 1 & \text{on } \mathcal{B}_h,\\ (1-\chi(r,x_3))\eta(r,x_3-h+h(0)) + \chi(r,x_3)\Phi\left(\frac{x_3}{\psi(r)}\right) & \text{on } \Omega \setminus \mathcal{B}_h, \end{cases} \end{equation}

and $\mathbf {w}_h = \nabla \times (\phi _h \mathbf {e}_\theta )$. Observe that the function $\mathbf {w}_h$ satisfies

\[ \mathbf{w}_h|_{\partial \mathcal{B}_h}=\mathbf{e}_3,\quad \mathbf{w}_h|_{\partial \Omega}=0,\quad \operatorname{\mathrm{div}}\mathbf{w}_h=0. \]

Indeed, the divergence-free condition is obvious from the definition of $\mathbf {w}_h$. Further, since $\phi _h = r/2$ on $\mathcal {B}_h$, we have $\mathbf {w}_h = \mathbf {e}_3$ there. Moreover, by definition of $\chi$ and $\eta$, we have $\phi _h=0$ on $\partial \Omega \setminus ( (-2 r_0,\, 2 r_0)^2 \times \{ 0 \} )$ as long as $r_0$ and $h$ are so small that $h+r_0^{1+\alpha } \leq d_0 < r_0$. Lastly, $\phi _h=0$ on $\partial \Omega \cap (-r_0,\, r_0)^2 \times \{0\}$ by definition of $\chi$ and $\Phi (0)=0$, and in the annulus $( (-2r_0,\, 2r_0)^2 \setminus (-r_0,\, r_0)^2 ) \times \{ 0 \}$ we use also $\eta (r,\,h(0))=0$ for $r>\mathfrak {r}_0$ for some $\mathfrak {r}_0\in (d_0,\, r_0)$ to finally conclude $\mathbf {w}_h|_{\partial \Omega }=0$, provided $h$ is sufficiently close to zero.

We summarize further properties in the following lemma, the proof of which is given in [Reference Jin, Nečasová, Oschmann and Roy14, Lemma 3.1]:

Lemma 3.1 $\mathbf {w}_h\in C_c^\infty (\Omega )$ and

(3.4)\begin{equation} \|\partial_h\mathbf{w}_h\|_{L^\infty(\Omega\setminus \Omega_{h,r_0})} + \|\mathbf{w}_h\|_{W^{1,\infty}(\Omega\setminus \Omega_{h,r_0})}\lesssim 1. \end{equation}

Moreover,

\begin{align*} \|\mathbf{w}_h\|_{L^q(\Omega_{h,r_0})} & \lesssim 1 \text{ for any } q<1+\frac3\alpha,\\ \|\partial_h \mathbf{w}_h\|_{L^q(\Omega_{h,r_0})} + \|\nabla \mathbf{w}_h\|_{L^q(\Omega_{h,r_0})} & \lesssim 1 \text{ for any } q<\frac{3+\alpha}{1+2\alpha}. \end{align*}

Remark 3.2 The condition $\alpha (q-1)<3$ coming from $\mathbf {w}_h$ is consistent with the results of [Reference Starovoitov16], where the author showed that collision is forbidden as long as $\alpha (q-1) \geq 3$. Especially, for shapes of class $C^{1,1}$ like balls, this states that no collision can occur as long as $q \geq 4$, which fits the assumptions made in [Reference Feireisl, Hillairet and Nečasová4] and [Reference Nečasová15]. Moreover, the difference $q - \frac{2+\alpha }{1+2\alpha }$occurs in the incompressible two-dimensional setting in [Reference Filippas and Tersenov8, Theorem 3.2] as an optimal value for the solid to move vertically; our fraction $\frac{3+\alpha }{1+2\alpha }$ thus seems like a three-dimensional counterpart to this.

3.2. Estimates near the collision—proof of theorem 2.2

Let $0< T< T_*$ and let $\zeta \in C^1_c([0,\,T))$ with $0\leq \zeta \leq 1$, $\zeta '\leq 0$, and $\zeta =1$ near $t=0$. We take $\zeta (t){\mathbf {w}}_{h(t)}$ as test function in the weak formulation of the momentum equation (1.1)$_2$ with right-hand side ${\mathbf {f}}=-g{\mathbf {e}}_3$, $g>0$. Recalling $\operatorname {\mathrm {div}}\mathbf {w}_h=0$ and $\partial _t \mathbf {w}_{h(t)}=\dot {h}(t) \partial _h\mathbf {w}_{h(t)}$, we get

(3.5)\begin{equation} \begin{aligned} & \int_0^T\zeta\int_\Omega \rho \mathbf{u}\otimes \mathbf{u}:\mathbb{D}({\mathbf{w}}_h) \ \mathrm{d} x \ \mathrm{d} t + \int^T_0\zeta'\int_\Omega \rho \mathbf{u}\cdot {\mathbf{w}}_h \ \mathrm{d} x \ \mathrm{d} t\\ & \qquad + \int^T_0\zeta \dot{h}\int_\Omega \rho \mathbf{u}\cdot {\partial_h \mathbf{w}}_h \ \mathrm{d} x \ \mathrm{d} t - \int^T_0\zeta\int_\Omega {\mathbb{S}} :\mathbb{D}({ \mathbf{w}}_h) \ \mathrm{d} x \ \mathrm{d} t\\ & \quad=\int_0^T\zeta \int_\Omega \rho g \mathbf{e}_3\cdot\mathbf{w}_h \ \mathrm{d} x \ \mathrm{d} t - \int_\Omega \mathbf{m}_0\cdot \mathbf{w}_h \ \mathrm{d} x\\ & \quad= \int_0^T\zeta \int_{\mathcal{B}_h} \rho g \mathbf{e}_3\cdot\mathbf{w}_h \ \mathrm{d} x \ \mathrm{d} t + \int_0^T\zeta \int_{\mathcal{F}_h} \rho g \mathbf{e}_3\cdot\mathbf{w}_h \ \mathrm{d} x \ \mathrm{d} t - \int_\Omega \mathbf{m}_0\cdot \mathbf{w}_h \ \mathrm{d} x. \end{aligned} \end{equation}

Observe that we have $\mathbf {w}_h=\mathbf {e}_3$ on $\mathcal {B}_h$, so for a sequence $\zeta _k\to 1$ in $L^1([0,\,T))$,

\[ \int^T_0\zeta_k \int_{\mathcal{B}_h} \rho g{\mathbf{e}}_3\cdot {\mathbf{w}}_h \ \mathrm{d} x \ \mathrm{d} t = \int_0^T\zeta_k \int_{\mathcal{B}_h} \rho_\mathcal{B} g \ \mathrm{d} x \ \mathrm{d} t = mg \|\zeta_k\|_{L^1(0,T)} \to mgT. \]

In particular, for a proper choice of $\zeta$, it follows that

(3.6)\begin{equation} \begin{aligned} & \frac12\,mgT \leq \int_0^T\zeta\int_\Omega \rho \mathbf{u}\otimes \mathbf{u}:\mathbb{D}({\mathbf{w}}_h) \ \mathrm{d} x \ \mathrm{d} t + \int^T_0\zeta'\int_\Omega \rho \mathbf{u}\cdot {\mathbf{w}}_h \ \mathrm{d} x \ \mathrm{d} t\\ & \quad + \int^T_0\zeta \dot{h}\int_\Omega \rho \mathbf{u}\cdot {\partial_h \mathbf{w}}_h \ \mathrm{d} x \ \mathrm{d} t\\ & \quad - \int^T_0\zeta\int_\Omega {\mathbb{S}} :\mathbb{D}({ \mathbf{w}}_h) \ \mathrm{d} x \ \mathrm{d} t - \int_0^T\zeta \int_{\mathcal{F}_h} \rho g \mathbf{e}_3\cdot\mathbf{w}_h \ \mathrm{d} x \ \mathrm{d} t \\ & \quad + \int_\Omega \mathbf{m}_0\cdot \mathbf{w}_h \ \mathrm{d} x = \sum_{j=1}^6 I_j. \end{aligned} \end{equation}

We will estimate each $I_j$ separately, and set our focus on the explicit dependence on $T$ and $m$. For the latter purpose, we split each density-dependent integral into its fluid and solid part $I_j^f$ and $I_j^\mathcal {B}$, respectively. The proof follows the same lines as [Reference Jin, Nečasová, Oschmann and Roy14], so we will just state the estimates and highlight the differences due to the non-Newtonian setting.

$\bullet$ For $I_2^f$, we have

\[ |I_2^f| \lesssim (E_0+1)^{\frac{1}{2\gamma}+\frac{1}{2}} \quad \text{as long as} \quad \alpha < \frac{3\gamma-3}{\gamma+1}. \]

$\bullet$ For $I_2^\mathcal {B}$, note that due to $\omega (t) = \pm |\omega (t)| \mathbf {e}_3$, $\mathbf {u} |_{\mathcal {B}_h} = \dot {\mathbf {G}}(t) + \omega \times (x - \mathbf {G}(t))$, $\mathbf {G}(t) = \mathbf {G}(0) + (h(t)-h(0))\mathbf {e}_3$, $\rho |_{\mathcal {B}_h} = \rho _\mathcal {B}>0$, and $\mathbf {w}_h |_{\mathcal {B}_h} = \mathbf {e}_3$, we have

\[ \int_{\mathcal{B}_h} \rho \mathbf{u} \cdot \mathbf{w}_h \ \mathrm{d} x = \rho_\mathcal{B} \int_{\mathcal{B}_h} \big[ \dot{h} \mathbf{e}_3 \pm |\omega|\mathbf{e}_3 \times (x - \mathbf{G}(0) - (h-h(0))\mathbf{e}_3) \big] \cdot \mathbf{e}_3 \ \mathrm{d} x = m \dot{h}. \]

Further, from the bounds (2.2), we infer

\[ \sup\limits_{t\in (0,T)} |\dot h|^2 = \sup\limits_{t \in (0,T)} \frac{2}{m} \int_{\mathcal{B}_h} \rho_\mathcal{B} |\dot h|^2 \ \mathrm{d} x \leq \sup\limits_{t \in (0,T)} \frac{2}{m} \int_{\mathcal{B}_h} \rho_\mathcal{B} |\mathbf{u}|^2 \ \mathrm{d} x \lesssim \frac{2}{m} (E_0+1). \]

Hence, by the choice of $\zeta$ such that $|\zeta '|=-\zeta '$ and $\zeta (0)=1+\zeta (T)=1$, we get

\[ |I_2^\mathcal{B}| \lesssim -\int_0^T \zeta' m |\dot h| \ \mathrm{d} t \lesssim \sqrt{m}(E_0 + 1)^\frac{1}{2}. \]

$\bullet$ For $I_3$, observe that $I_3^\mathcal {B}=0$ due to $\partial _h \mathbf {w}_h|_{\mathcal {B}_h} = \partial _h \mathbf {e}_3=0$. Next, by Sobolev embedding and the bounds (2.2),

\[ \|\mathbf{u}\|_{L^p(0,T;L^{p^\ast}(\Omega))} \lesssim \|\mathbf{u}\|_{L^p(0,T;W_0^{1,p}(\Omega))} \lesssim (E_0+1)^\frac{1}{p}, \]

where we set $p^\ast = 3p/(3-p)$. Thus,

\begin{align*} |I_3|& =|I_3^f| \leq \int_0^T \zeta |\dot{h}(t)|\, \|\rho\|_{L^\gamma(\mathcal{F}({\cdot}))} \|\mathbf{u}\|_{L^{p^\ast}(\Omega)}\|\partial_h \mathbf{w}_h\|_{L^\frac{p^\ast \gamma}{p^\ast (\gamma-1) - \gamma}(\Omega)} \ \mathrm{d} t\\ & \lesssim \|\rho\|_{L^\infty(0,T;L^\gamma(\mathcal{F}({\cdot})))} \|\mathbf{u}\|_{L^p(0,T;L^{p^\ast}(\Omega))} \|\partial_h \mathbf{w}_h\|_{L^\infty(0,T;L^\frac{p^\ast \gamma}{p^\ast (\gamma-1) - \gamma}(\Omega))} \|\zeta \dot{h}\|_{L^{p'}(0,T)} \\ & \lesssim (E_0+1)^{\frac{1}{\gamma}+\frac{1}{p}} \|\dot{h}\|_{L^\infty(0,T)} \|\zeta\|_{L^{p'}(0,T)}\lesssim \sqrt{\frac1m} (E_0+1)^{\frac{1}{\gamma}+ \frac{1}{p} + \frac{1}{2}} T^\frac{1}{p'}, \end{align*}

where we have used estimate (2.2) and lemma 3.1 under the condition

\[ \frac{p^\ast \gamma}{p^\ast (\gamma-1) - \gamma} < \frac{3+\alpha}{1+2\alpha} \Leftrightarrow \alpha < \frac{2p^\ast \gamma - 3p^\ast{-} 3\gamma}{p^\ast \gamma + p^\ast{+} \gamma} = \frac{9(p\gamma - p - \gamma)}{2p\gamma + 3p + 3\gamma}. \]

$\bullet$ Regarding $I_4$, using that $\mathbb {S} \in L^{p'}((0,\,T) \times \Omega )$ is bounded by $c_1>0$ (see (2.1)), we calculate

\begin{align*} & |I_4| \lesssim \int_0^T \zeta \|\mathbb{S}\|_{L^{p'}(\Omega)} \|\nabla \mathbf{w}_h\|_{L^p(\Omega)} \ \mathrm{d} t\\ & \quad\leq \|\zeta\|_{L^p(0,T)} \|\mathbb{S}\|_{L^{p'}((0,T)\times \Omega)} \|\nabla\mathbf{w}_h\|_{L^\infty(0,T;L^p(\Omega))} \lesssim T^\frac{1}{p}, \end{align*}

where we have used lemma 3.1 under the condition

\[ p<\frac{3+\alpha}{1+2\alpha} \Leftrightarrow \alpha< \frac{3-p}{2p-1}. \]

From here, we get the restriction $p<3$.

$\bullet$ For $I_5=I_5^f$,

\[ |I_5| \leq g (E_0+1)^\frac{1}{\gamma} T \quad \text{as long as} \quad \alpha< 3(\gamma-1). \]

$\bullet$ Similar to $I_2^f$, we have for $I_6^f$

\begin{align*} |I_6^f| & \leq \|\mathbf{m}_0\|_{L^\frac{2\gamma}{\gamma+1}(\mathcal{F}(0))}\|\mathbf{w}_h\|_{L^\infty(0,T;L^\frac{2\gamma}{\gamma-1}(\Omega))} \\ & \lesssim \bigg\|\frac{|\mathbf{m}_0|^2}{\rho_0}\bigg\|_{L^1(\mathcal{F}(0))}^\frac{1}{2} \|\rho_0\|_{L^\gamma(\mathcal{F}(0))}^\frac{1}{2} \lesssim (E_0+1)^{\frac{1}{2}+\frac{1}{2\gamma}}. \end{align*}

$\bullet$ For $I_6^\mathcal {B}$, since $\mathbf {m}_0\cdot \mathbf {w}_h |_{\mathcal {B}_h} = \rho _\mathcal {B} \mathbf {u}(0)|_{\mathcal {B}_h} \cdot \mathbf {e}_3 = \rho _\mathcal {B} \dot h$,

\[ |I_6^s| \lesssim \sqrt{m}(E_0+1)^\frac{1}{2}. \]

$\bullet$ Let us turn to $I_1$. Due to $\mathbf {w}_h|_{\mathcal {B}_h}=\mathbf {e}_3$, we see that $I_1^\mathcal {B}=0$ since $\mathbb {D}(\mathbf {w}_h)=0$ there. Hence, we calculate

\begin{align*} |I_1|& = |I_1^f| \lesssim \int_0^T \zeta \|\rho\|_{L^\gamma(\mathcal{F}_h))} \|\mathbf{u}\|_{L^{p^\ast}(\Omega)}^2 \|\nabla\mathbf{w}_h\|_{L^\frac{p^\ast \gamma}{p^\ast (\gamma-1) - 2\gamma}(\Omega)} \ \mathrm{d} t\\ & \lesssim \|\rho\|_{L^\infty(0,T;L^\gamma(\mathcal{F}_h))} \|\nabla\mathbf{w}_h\|_{L^\infty(0,T;L^\frac{p^\ast \gamma}{p^\ast (\gamma-1) - 2\gamma}(\Omega))} \int_0^T\zeta \|\nabla\mathbf{u} \|_{L^p(\Omega)}^2 \ \mathrm{d} t\\ & \lesssim (E_0+1)^\frac{1}{\gamma} \|\zeta \|_{L^\frac{p}{p-2}(0,T)} \|\nabla\mathbf{u}\|_{L^p((0,T)\times\Omega)}^2 \lesssim (E_0+1)^{\frac{1}{\gamma}+\frac{2}{p}} T^{1-\frac{2}{p}}, \end{align*}

by using estimate (2.2) and lemma 3.1 under the condition

\[ \frac{p^\ast \gamma}{p^\ast (\gamma-1) - 2\gamma}<\frac{3+\alpha}{1+2\alpha} \Leftrightarrow \alpha<\frac{2p^\ast \gamma - 3p^\ast{-} 6\gamma}{p^\ast \gamma + p^\ast{+} 2\gamma} = \frac{3(4p \gamma - 3p - 6\gamma)}{p\gamma + 3p + 6\gamma}. \]

Let us emphasize that this term is the only place where the assumption $p\geq 2$ is needed.

Collecting all the requirements made above, we infer

\[ \gamma>\frac32, \quad 2 \leq p < 3, \quad p\gamma>p+\gamma, \quad 4p\gamma>3p+6\gamma, \]

which translates into

\[ \frac32< \gamma \leq 3, \quad \frac{6\gamma}{4\gamma-3} < p < 3, \quad \text{or} \quad \gamma>3, \quad 2 \leq p < 3. \]

Note further that for any $\gamma \geq 3/2$ and any ${\gamma }/{(\gamma -1)}< p<3$,

\[ \frac{3(4p \gamma - 3p - 6\gamma)}{p\gamma + 3p + 6\gamma}\leq \frac{9(p\gamma - p - \gamma)}{2p\gamma + 3p + 3\gamma} \leq \frac{3\gamma-3}{\gamma+1} \leq 3(\gamma-1) , \]

and that all estimates are independent of the choice of $\zeta$. Hence, we can take a sequence $\zeta _k\to 1$ in $L^r([0,\,T))$ for some suitable $r > 1$ without changing the bounds obtained. In turn, collecting all estimates above, we finally arrive at

\begin{align*} \frac12\,mgT & \leq C_0 (1\!+\!\sqrt{m}+\sqrt{m}^{{-}1}) \bigg(1 \!+\! (E_0+1)^{\frac{1}{2}+\frac{1}{2\gamma}} + (E_0+1)^\frac{1}{2} + (E_0+1)^\frac{1}{p}\\ & \quad + (E_0+1)^{\frac{1}{\gamma} + \frac{1}{p} + \frac{1}{2}} + g(E_0+1)^\frac{1}{\gamma} + (E_0+1)^{\frac{1}{\gamma}+\frac{2}{p}} \bigg) \cdot (1 + T^\frac{1}{p'} + T^\frac{1}{p} + T^{1-\frac{2}{p}} + T), \end{align*}

which, after dividing by $\frac{1}{2} {mg}$ and using Young's inequality on several terms, leads to

(3.7)\begin{equation} T \leq C_0 \max\{m^{{-}1/2}, m^{{-}3/2} \} \bigg(1 + E_0^{\frac{1}{2} + \frac{1}{\gamma} + \frac{1}{p}} \bigg) (1 + T), \end{equation}

where $C_0$ only depends on $p,\, \gamma,\, g,\, \alpha$, the bounds on $\mathbf {w}_h$ obtained in lemma 3.1, and the implicit constant appearing in (2.2), provided

\begin{align*} & \alpha<\min \bigg\{ \frac{3-p}{2p-1}, \frac{3(4p\gamma - 3p - 6\gamma)}{p\gamma + 3p + 6\gamma} \bigg\} \quad \text{with}\\ & \frac32< \gamma \leq 3, \ \frac{6\gamma}{4\gamma-3} < p < 3, \quad \text{or} \quad \gamma>3, \ 2 \leq p < 3. \end{align*}

Recalling the definition of $E_0$ from (2.3) as

\begin{align*} E_0 & = \int_{\mathcal{F}(0)}\bigg(\frac{1}{2}\frac{|\mathbf{m}_0|^2}{\rho_0} + \frac{\rho_0^\gamma}{\gamma-1} \bigg) \ \mathrm{d} x + \frac{m}{2}|\mathbf{V}_0|^2 + \frac12 \mathbb{J}(0) \omega_0\cdot\omega_0,\\ \mathbb{J}(0) & = \int_{\mathcal{B}_0}\rho_\mathcal{B}\Big(|x-\mathbf{G}_0|^2{\mathbb{I}}-(x-\mathbf{G}_0)\otimes (x-\mathbf{G}_0)\Big) \ \mathrm{d} x, \end{align*}

we see that collision can occur only if the solid's mass in (3.7) is large enough, meaning in fact its density is very high. Since $E_0$ depends on the solid's mass, we require the solid initially to have low vertical and rotational speed. More precisely, choosing $\mathbf {V}_0$ and $\omega _0$ such that $|\mathbf {V}_0|,\, |\omega _0|=\mathcal {O}(m^{-1/2})$, and choosing $m$ high enough such that

(3.8)\begin{equation} C_0 \max\{m^{{-}1/2}, m^{{-}3/2} \} \bigg(1 + E_0^{\frac{1}{2} + \frac{1}{\gamma} + \frac{1}{p}} \bigg) < 1, \end{equation}

the solid touches the boundary of $\Omega$ in finite time, finishing the proof of theorem 2.2.

Remark 3.3 We see that if, by change, the constant $C_0<1$ small enough, then we can get rid of the assumption on the smallness of $\mathbf {V}_0$ and $\omega _0$ by also choosing $m<1$. Indeed, in this case $\max \{m^{-1/2},\, m^{-3/2} \} = m^{-3/2}$ and $E_0 \lesssim 1$. Hence, for appropriate values $m<1$ and $C_0 m^{-3/2} < 1$, inequality (3.8) can still be valid.

4. Newtonian flow with temperature-growing viscosity

This section is devoted to investigate a different model for viscosity that does not fit into assumptions (S1)–(S3). More precisely, let

(4.1)\begin{equation} \mathbb{S}=2\mu(\vartheta) \bigg( \mathbb{D}(\mathbf{u}) - \frac13 \operatorname{\mathrm{div}} \mathbf{u} \mathbb{I} \bigg) +\eta(\vartheta) \operatorname{\mathrm{div}} \mathbf{u} \mathbb{I}, \end{equation}

where the viscosity coefficients $\mu,\,\eta$ are assumed to be continuous functions on $(0,\,\infty )$, $\mu$ is moreover Lipschitz continuous, and they satisfy

\[ 1+\vartheta \lesssim \mu(\vartheta), \quad |\mu'|\lesssim 1, \quad 0 \leq \eta(\vartheta) \lesssim 1+\vartheta. \]

Note that this means we consider a Newtonian fluid with growing viscosities that are not uniformly bounded in the temperature variable.

The equations governing the fluid's motion are now given by

(4.2)\begin{equation} \begin{cases} \partial_t \rho + \operatorname{\mathrm{div}}(\rho \mathbf{u}) = 0 & \text{in } \mathcal{F},\\ \partial_t(\rho \mathbf{u}) + \operatorname{\mathrm{div}}(\rho \mathbf{u} \otimes \mathbf{u}) - \operatorname{\mathrm{div}} \mathbb{S} + \nabla p(\rho, \vartheta) = \rho \mathbf{f} & \text{in } \mathcal{F},\\ m \ddot{\mathbf{G}}(t) ={-}\int_{\partial \mathcal{B}} (\mathbb{S} - p\mathbb{I}) \mathbf{n} \ \mathrm{d} \sigma + \int_\mathcal{B} \rho_\mathcal{B} \mathbf{f} \ \mathrm{d} x & \text{in } \mathcal{F},\\ \frac{\rm d}{{\rm d} t}(\mathbb{J} \omega) ={-}\int_{\partial \mathcal{B}} (x-\mathbf{G}) \times (\mathbb{S} - p\mathbb{I})\mathbf{n} \ \mathrm{d} \sigma + \int_\mathcal{B} (x-\mathbf{G}) \times \rho_\mathcal{B} \mathbf{f} \ \mathrm{d} x & \text{in } \mathcal{F},\\ \partial_t(\rho s) + \operatorname{\mathrm{div}}(\rho s \mathbf{u}) + \operatorname{\mathrm{div}} \frac{\mathbf{q}}{\vartheta} = \frac{1}{\vartheta} \big( \mathbb{S} : \nabla \mathbf{u} - \frac{\mathbf{q} \cdot \nabla \vartheta}{\vartheta} \big) & \text{in } \mathcal{F},\\ \mathbf{u} = \dot{\mathbf{G}}(t) + \omega(t) \times (x - \mathbf{G}(t)) & \text{on } \partial \mathcal{B},\\ \mathbf{u} = 0 & \text{on } \partial \Omega,\\ \mathbf{q} \cdot \mathbf{n} = 0 & \text{on } \partial \Omega,\\ \rho(0,\cdot)=\rho_0, \ (\rho \mathbf{u})(0,\cdot)=\mathbf{m}_0, \ \vartheta(0,\cdot)=\vartheta_0, \\ \mathbf{G}(0) =\mathbf{G}_0, \ \dot{\mathbf{G}}(0) = \mathbf{V}_0, \ \omega(0) = \omega_0 & \text{in } \mathcal{F}(0), \end{cases} \end{equation}

where now $p(\rho,\, \vartheta ) = \rho ^\gamma + \rho \vartheta + \vartheta ^4$, the heat flow vector $\mathbf {q} = \mathbf {q}(\vartheta,\, \nabla \vartheta )$ is given by Fourier's law

\[ \mathbf{q}(\vartheta, \nabla \vartheta) ={-} \kappa(\vartheta) \nabla \vartheta \]

with the heat conductivity coefficient satisfying

\[ \kappa(\vartheta) \sim 1+\vartheta^\beta\ \text{for some} \ \beta>1, \]

and the specific entropy $s=s(\rho,\, \vartheta )$ is connected to the pressure $p(\rho,\, \vartheta )$ and the internal energy $e(\rho,\, \vartheta )$ of the fluid by Gibbs’ relation

\begin{align*} \vartheta D s = D e + p D \left(\frac{1}{\rho}\right). \end{align*}

Note that this relation determines the internal energy and specific entropy as

\[ e(\rho, \vartheta) = \frac{\rho^{\gamma-1}}{\gamma-1} + 3 \frac{\vartheta^4}{\rho} + c_v \vartheta, \quad s(\rho, \vartheta) = 4\frac{\vartheta^3}{\rho} + \log \frac{\vartheta^{c_v}}{\rho}, \]

where $c_v>0$ is the specific heat capacity at constant volume (see, e.g., [Reference Feireisl and Novotný7]). Denoting $\vartheta _\mathcal {B}>0$ the solid's temperature, we extend the temperature similarly to the velocity and density as

\[ \vartheta = \begin{cases} \vartheta & \text{in } \mathcal{F},\\ \vartheta_\mathcal{B} & \text{in } \mathcal{B}, \end{cases} \]

and we consider the continuity of the heat flux $\mathbf {q}(\vartheta,\, \nabla \vartheta )\cdot \mathbf {n} = \mathbf {q}(\vartheta _\mathcal {B},\, \nabla \vartheta _\mathcal {B}) \cdot \mathbf {n}$ on $\partial \mathcal {B}$. Moreover, for simplicity we assume that the heat conductivity coefficient of the solid is the same as the fluid's one (this can be generalized, see [Reference Březina2, Equation (4.23)]).

Noticing that the existence proof of theorem 4.1.6 in [Reference Březina2] also works for any $\beta >2$ instead of $\beta =3$, in such case we have the uniform bound

\[ \|\vartheta^\frac{\beta}{2}\|_{L^2(0,T;W^{1,2}(\Omega))}^2 \lesssim E_0+1, \]

where this time

(4.3)\begin{equation} E_0 = \int_{\mathcal{F}(0)} \frac{|\mathbf{m}_0|^2}{2 \rho_0} + \rho_0 e(\rho_0, \vartheta_0) \ \mathrm{d} x + \frac{m}{2} |\mathbf{V}_0|^2 + \mathbb{J}(0)\omega_0 \cdot \omega_0. \end{equation}

Thanks to Sobolev embedding, this yields

\[ \vartheta^\frac{\beta}{2} \in L^2(0,T;L^6(\Omega)), \quad \text{that is,} \quad \vartheta \in L^{\beta}(0,T;L^{3\beta}(\Omega)), \]

in turn,

(4.4)\begin{equation} \|\vartheta\|_{L^\beta(0,T;L^{3\beta}(\Omega))}^\beta \lesssim E_0+1. \end{equation}

Accordingly, the estimate for the stress tensor in $I_4$ changes into

\begin{align*} |I_4| & = \left| \int_0^T \zeta \int_\Omega \mathbb{S}:\nabla \mathbf{w}_h \ \mathrm{d} x \ \mathrm{d} t \right| \lesssim \int_0^T \zeta \|\vartheta\|_{L^{3\beta}(\Omega)} \|\nabla \mathbf{u}\|_{L^2(\Omega)} \|\nabla \mathbf{w}_h\|_{L^\frac{6\beta}{3\beta-2}(\Omega)} \ \mathrm{d} t \\ & \leq \|\zeta\|_{L^\frac{2\beta}{\beta-2}(0,T)} \|\vartheta\|_{L^\beta(0,T;L^{3\beta}(\Omega))} \|\nabla \mathbf{u}\|_{L^2((0,T)\times \Omega)} \|\nabla\mathbf{w}_h\|_{L^\infty(0,T;L^\frac{\beta}{3\beta-2}(\Omega))}\\ & \lesssim (E_0+1)^{\frac{1}{\beta} + \frac{1}{2}} T^{\frac{1}{2}-\frac{1}{\beta}}, \end{align*}

provided

\[ \frac{6\beta}{3\beta-2} < \frac{3+\alpha}{1+2\alpha} \Leftrightarrow \alpha < \frac{3(\beta-2)}{9\beta+2}, \]

while all the other estimates stay the same. Hence, repeating the arguments from § 3, we can state the following

Theorem 4.1 Let $\gamma >3$, $\beta >2$, $0<\alpha \leq 1$, and $\Omega,\, \mathcal {B}\subset \mathbb {R}^3$ be bounded domains of class $C^{1,\alpha }$. Let $(\rho,\, \vartheta,\, \mathbf {u},\, {\mathbf {G}})$ be a weak solution to (4.2) enjoying the bounds (2.2) and (4.4), with the initial energy given by (4.3). Moreover, let $\mathbb {S}$ be given by (4.1), and assume that (A1)–(A6) are satisfied. If the solid's mass is large enough, and its initial vertical and rotational velocities are small enough such that inequality (3.8) is fulfilled, then the solid touches $\partial \Omega$ in finite time provided

\[ \alpha < \bigg\{ \frac{3(\gamma-3)}{4\gamma+3}, \frac{3(\beta-2)}{9\beta+2} \bigg\}. \]

As can be easily seen, the same arguments can be used for temperature-dependent non-Newtonian fluids, provided the stress tensor decomposes like

\[ \mathbb{S}(\vartheta, \mathbb{M}) = \mu(\vartheta) \tilde{\mathbb{S}}(\mathbb{M}) + \eta(\vartheta) |\operatorname{\mathrm{div}} \mathbf{u}|^{p-2} \operatorname{\mathrm{div}} \mathbf{u} \mathbb{I} \]

for some tensor $\tilde {\mathbb {S}}$ satisfying (S1)–(S3), and $\mu,\, \eta$ are as above. The details are left to the interested reader.

Remark 4.2 As a matter of fact, all the analyses in this article also hold for the incompressible case, which (roughly speaking) corresponds to $\gamma =\infty$. Thus, collision for this type of heat-conducting fluids occurs if $\beta >2$ and $\alpha <{3(\beta -2)}/{(9\beta +2)}$. Also here, for constant temperature corresponding to a perfectly heat-conducting fluid, we recover the borderline value $\alpha <1/3$ in the limit $\beta \to \infty$, see remark 2.4.

Acknowledgements

Š. N. and F. O. have been supported by the Czech Science Foundation (GAČR) project 22-01591S. Moreover, Š. N. has been supported by Praemium Academiae of Š. Nečasová. The Institute of Mathematics, CAS is supported by RVO:67985840.

References

Abbatiello, A. and Feireisl, E.. On a class of generalized solutions to equations describing incompressible viscous fluids. Annali di Matematica Pura ed Applicata (1923-) 199 (2020), 11831195.CrossRefGoogle Scholar
Březina, J.. Selected Mathematical Problems in the Thermodynamics of Viscous Compressible Fluids, PhD thesis, Univerzita Karlova, Matematicko-fyzikální fakulta, 2008.Google Scholar
Feireisl, E.. On the motion of rigid bodies in a viscous compressible fluid. Arch. Ration. Mech. Anal. 167 (2003), 281.CrossRefGoogle Scholar
Feireisl, E., Hillairet, M., and Nečasová, Š.. On the motion of several rigid bodies in an incompressible non-Newtonian fluid. Nonlinearity 21 (2008), 1349.CrossRefGoogle Scholar
Feireisl, E., Liao, X., and Malek, J.. Global weak solutions to a class of non-Newtonian compressible fluids. Math. Methods. Appl. Sci. 38 (2015), 34823494.CrossRefGoogle Scholar
Feireisl, E. and Nečasová, Š.. On the motion of several rigid bodies in a viscous multipolar fluid. Funct. Anal. Evolut. Equ.: The Günter Lumer Volume (2008), 291305.Google Scholar
Feireisl, E. and Novotný, A.. Singular limits in thermodynamics of viscous fluids, Vol. 2 (Basel: Birkhäuser, 2009).CrossRefGoogle Scholar
Filippas, S. and Tersenov, A.. On vector fields describing the 2D motion of a rigid body in a viscous fluid and applications. J. Math. Fluid Mech. 23 (2021), 124.CrossRefGoogle Scholar
Gérard-Varet, D. and Hillairet, M.. Regularity issues in the problem of fluid structure interaction. Arch. Ration. Mech. Anal. 195 (2010), 375407.CrossRefGoogle Scholar
Gérard-Varet, D. and Hillairet, M.. Computation of the drag force on a sphere close to a wall: the roughness issue. ESAIM: Math. Model. Numer. Anal. 46 (2012), 12011224.CrossRefGoogle Scholar
Gérard-Varet, D. and Hillairet, M.. Existence of weak solutions up to collision for viscous fluid-solid systems with slip. Comm. Pure Appl. Math. 67 (2014), 20222075.CrossRefGoogle Scholar
Gérard-Varet, D., Hillairet, M. , and Wang, C.. The influence of boundary conditions on the contact problem in a 3D Navier-Stokes flow. J. Math. Pures Appl. (9) 103 (2015), 138.CrossRefGoogle Scholar
Hillairet, M.. Lack of collision between solid bodies in a 2D incompressible viscous flow. Comm. Partial Differ. Equ. 32 (2007), 13451371.CrossRefGoogle Scholar
Jin, B. J., Nečasová, Š., Oschmann, F., and Roy, A., Collision/no-collision results of a solid body with its container in a 3D compressible viscous fluid, preprint arXiv:2210.04698 (2023).Google Scholar
Nečasová, Š.. On the motion of several rigid bodies in an incompressible non-Newtonian and heat-conducting fluid. Annali Dell'universita’di Ferrara 55 (2009), 325352.CrossRefGoogle Scholar
Starovoitov, V. N.. Behavior of a rigid body in an incompressible viscous fluid near a boundary, in Free boundary problems: Theory and applications (Basel: Birkhäuser, 2003), pp. 313–327.CrossRefGoogle Scholar
Figure 0

Figure 1. The body $\mathcal {B}$ and fluid $\mathcal {F}$ in the container $\Omega$.