Hostname: page-component-cd9895bd7-7cvxr Total loading time: 0 Render date: 2024-12-18T15:26:44.942Z Has data issue: false hasContentIssue false
  • English
  • Français

Effects of air pollutants on buildings and materials

Published online by Cambridge University Press:  05 December 2011

R. N. Butlin
R. N. Butlin
Affiliation:
Building Research Establishment, Garston, Watford WD2 7JR, U.K.
Get access

Synopsis

The main pollutants affecting materials are sulphur dioxide and sulphates, nitrogen oxides and nitrates, chlorides, carbon dioxide and ozone. In marine environments it is important to separate the effects of anthropogenic pollutants from marine sources of the same substances. The effects of paniculate matter, especially from diesel vehicle emissions is of increasing significance.

In buildings containing books, historical artefacts or other works of art indoor pollutants may cause significant degradation. These pollutants may either be lower concentrations of pollutants originating outdoors or other substances generated from synthetic materials, paints, varnishes and display cases as well as from combustion for heating.

The materials most sensitive to pollutants are calcareous building stones and ferrous metals. Manifestations of damage include losses of mass, changes in porosity, discoloration and embrittlement. In the case of stone it is difficult to (1) dissociate the effects of historical concentrations of pollution from current ones and (2) to establish background rates of erosion or decay in the absence of pollutants.

Damage to materials in polluted atmospheres can be attributed to dry or wet deposition of pollutants, or dissolution in rainfall in the case of stone. Estimates of the contributions of the different mechanisms of decay have been made in programmes in the U.S.A. and the U.K.

To obtain estimates of the economic cost of damage from acid deposition it is necessary to know how decay rates are related quantitatively to pollutants and meteorological parameters (damage functions), and the distribution of materials exposed in buildings and in geographical areas. There are few damage functions available and those in existence lack general applicability. There is. therefore, much importance attached to national and international exposure programmes that have been established to assess the responses of a range of materials to different environments. Such work is also of interest in predicting the potential effects of climatic changes on materials.

Methodologies have been developed to enable estimates of economic costs of damage to be made. These are being refined with better data on rates of decay obtained from mathematical models and from exposure programmes. The concept of target loads for damage, originally devised for the natural environment, is being introduced to help assess the action needed to reduce degradation of sensitive materials and buildings.

Type
Research Article
Information
Proceedings of the Royal Society of Edinburgh, Section B: Biological Sciences , Volume 97: Acidic Deposition: Its Nature and Impacts , 1990 , pp. 255 - 272
Copyright
Copyright © Royal Society of Edinburgh 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Al-Ismail, M. A., 1981. Effects of ammonium chloride paniculate matter on aluminium. M.Sc Thesis, University of Manchester Institute of Science and Technology (Unpublished).Google Scholar
Amoroso, G. G., & Fassina, V., 1983. Stone decay and conservation: Atmospheric pollution, cleaning, consolidation, and protection. Materials Science Monographs 11. Oxford: Elsevier.Google Scholar
Banks, W. B., & Evans, P. D., 1984. Degradation of wood surfaces by water. Proc. 18th Annual Meeting, International Research Group on Wood Preservation, Stockholm.Google Scholar
Benarie, M., 1986. Research Directions on the Environmental Deterioration and on the Conservation of Historic Buildings and Monuments. In The Effects of Air Pollution on Historic Buildings and Monuments (Commission of the European Communities). II–1—II.Google Scholar
Benarie, M., & Lipfert, F. L., 1986. A general corrosion function in terms of atmospheric pollutant concentrations and rain pH. Atmospheric Environment 20, 1947–58.Google Scholar
BISRA 1938. Fifth report of the corrosion committee. Iron and Steel Special Report 21.Google Scholar
BISRA 1959. Sixth report of the corrosion committee. Iron and Steel Special Report 66.Google Scholar
Brimblecombe, P., 1987. The Big Smoke – A History of Air Pollution in London since Medieval Times. Methuen: London.Google Scholar
Brimblecombe, P., 1990. The Composition of Museum Atmospheres. Atmospheric Environment 24B, 1–8.Google Scholar
British Steel Corporation 1979–1980. Unpublished data.Google Scholar
British Steel Corporation 1983–1984. Unpublished data.Google Scholar
Britton, S. C., 1976. Tin versus corrosion. International Tin Research Institute Pub. 510.Google Scholar
Building Effects Review Group (BERG) 1989. The Effect of Acid Deposition on Buildings and Building Materials in the United Kingdom. London: HMSO.Google Scholar
Butlin, R. N., Coote, A. T., Devenish, M., Hughes, I., Hutchens, C., Irwin, J. G., Lloyd, G. O., Massey, S. W., Webb, A. H., & Yates, T. J. S., 1991. Preliminary results from the analysis of metal samples from the National Materials Exposure Programme. Atmospheric Environment B (in press).Google Scholar
Carter, V. E., 1982. Atmospheric corrosion of non-ferrous metals. In Corrosion Processes, 77–113, ed. Parkins, R. N.Google Scholar
Chan, W. H., & Chung, D. H. S., 1986. Regional-scale precipitation scavenging of SO2, SO4, NO3 and HNO3. Atmospheric Environment 20, 1397–402.Google Scholar
Charola, A. E., 1988. Chemical–physical factors in stone deterioration. Durability of Building Materials 5, 309–16.Google Scholar
Charola, A. E., & Lazzarini, L., 1986. Deterioration of Brick Masonry Caused by Acid Rain. In Materials Degradation Caused by Acid Rain, ACS Symposium Series 318, pp. 250–8, ed. Baboian, R., American Chemical Society.CrossRefGoogle Scholar
Cox, G. A., Heavens, O. S., Newton, R. G., & Pollard, A. M., 1979. A study of the weathering behaviour of medieval window glass from York Minster. Journal of Glass Studies 21, 54–75.Google Scholar
Davies, A., & Sims, D., 1983. Weathering of Polymers. Barking: Elsevier Applied Science.Google Scholar
Del Monte, M., Sabbioni, C., & Vittori, O., 1981. Airborne carbon particles and marble deterioration. Atmospheric Environment 15, 654–2.Google Scholar
Del Monte, M., Sabbioni, C., & Vittori, O., 1984. Urban stone sulphation and oil-fired carbonaceous particles. Science of the Total Environment 36, 369–76.CrossRefGoogle Scholar
Electric Power Research Institute (EPRI) 1988. Materials Degradation and Acidic Deposition. EPRI Report EA-5424 Project 2664–14 Final Report. Washington, USA.Google Scholar
Fassina, V., 1988. Environmental Pollution in Relation to Stone Decay. Durability of Building Materials 5, 317–358.Google Scholar
Fitz, S., 1989. Causes, mechanisms and measurement of damage in cultural heritage materials — the state of the art: glass objects. In Pre-printed Abstracts of the European Symposium on Science, Technology and European Cultural Heritage, Bologna 1989, pp. 39–40.Google Scholar
Gaynes, N. I., 1985. Ozone is the culprit. Metal Finishing 83, 45–7.Google Scholar
Gehrmann, C. K., Petersen, K., & Krumbein, W. E., 1988. Interactions with environment and biocorrosion. In Proc. VIth International Congress on Deterioration and Conservation of Stone, Torun, 1988, Volume II. 33–38. Torun, Poland: Nicholas Copernicus University Press Dept.Google Scholar
Grassie, N., ed. 1977–1984. Developments in Polymer Degradation. Barking: Elsevier Applied Science.Google Scholar
Guidobaldi, F., 1981. Acid rain and corrosion of marble. An experimental approach, the conservation of stone II. Preprints of the contributions to the International Symposium, Bologna 1981, pp. 483–97.Google Scholar
Guidobaldi, F., Mecchi, A. M., & Segedin, M., 1988. Acid rain and the corrosion of marble. The influence of the frequency of rainfall. In Proc. VIth International Congress on Deterioration and Conservation of Stone, Torun, 1988, Volume II, pp. 151–60.Google Scholar
Guidobaldi, F., & Mecchi, A. M., 1985. Corrosion of marble by rain. The influence of surface roughness, rain intensity and additional washing. In Proc. Vth International Congress on Deterioration and Conservation of Stone, Lausanne, 1985, pp. 467–74.Google Scholar
Hoffmann, M. R., 1986. Fóg and Cloud Water Deposition. In Materials Degradation Caused by Acid Rain, ACS Symposium Series 318, pp. 64–91, ed. Baboian, R., American Chemical Society.Google Scholar
Jaynes, S. M., & Cooke, R. U., 1987. Stone weathering in southeast England. Atmospheric Environment 21, 1601–22.Google Scholar
Johansson, L. G., 1985. A laboratory study of the influence of NO2 and SO2 on the atmospheric corrosion of steel, copper, zinc and aluminium. Electrochemical Society Extended Abstracts 82, 221–2.Google Scholar
Johansson, L. G., Lindqvist, O., & Mangio, R. E., 1988. A study of the corrosion of calcareous stones exposed to humid air containing SO2 and NO2. Durability of Building Materials 5, 439–450.Google Scholar
Knofel, D., 1989. Causes, mechanisms and measurement of damage in cultural heritage materials — the state of the art: concrete structures. In Pre-printed Abstracts of the European Symposium on Science, Technology and European Cultural Heritage, Bologna 1989, pp. 39–40.Google Scholar
Krumbein, W. E., 1988. Biology of stone and minerals in buildings — biodeterioration, biotransfer, bioprotection. In Proc. VIth Int. Cong. on Deterioration and Conservation of Stone, Torun, 1988, Volume II, pp. 1–12.Google Scholar
Kyllo, K. E., & Ladisch, C. M., 1986. Acid Rain Degradation of Nylon. In Materials Degradation Caused by Acid Rain, ACS Symposium Series 318, pp. 342–59, ed. Baboian, R., American Chemical Society.Google Scholar
Lipfert, F. W., 1987. Effects of acidic deposition on the atmospheric deterioration of materials. Materials Performance (July) 12–19.Google Scholar
Lipfert, F. W., 1989a. Dry deposition velocity as an indicator for SO2 damage to materials. J.APCA 39, 446–52.Google Scholar
Lipfert, F. W., 1989b. Atmospheric damage to calcareous stones: Comparison and reconciliation of recent experimental findings. Atmospheric Environment 23, 415–29.Google Scholar
Livingston, R. A., 1985. The role of nitrogen oxides in the deterioration of carbonate stone. In Proc. Vth Int. Cong, on Deterioration and Conservation of Stone, Lausanne, 1985, pp. 509–16. Torun, Poland: Nicholas Copernicus University Press Dept.Google Scholar
Livingston, R. A., 1988. The application of petrology to the prediction of stone durability. In Proc. VIth Int. Cong, on Deterioration and Conservation of Stone, Torun, 1988, Volume I, pp. 432–45. Torun, Poland: Nicholas Copernicus University Press Dept.Google Scholar
Mattson, E., & Holm, R., 1968. Copper and copper alloys. American Society for Testing and Materials Special Technical Paper, 435, pp. 187–210.Google Scholar
May, E., & Lewis, F. J., 1988. Strategies and techniques for the study of bacterial populations on decaying stone work. In Proc. VIth Int. Cong. on Deterioration and Conservation of Stone, Torun, 1988, Volume II, pp. 59–70.Google Scholar
Mazurkiewicz, B., Banas, J., Bieda, K., & Piotrowski, A., 1976. Zesz. Nauk. Akad. Gorn. — Hutn. im Stanislawa Staszica, Mat. Fiz. Chem. 27, 115.Google Scholar
McGeary, F. L. et al. , 1968. Atmospheric exposure and non-ferrous metals and alloys — Aluminium: seven-year data. American Society for Testing and Materials Special Technical Paper, 435, pp. 141–73.Google Scholar
Medhurst, J., 1991. An assessment of the effects of air pollution on building materials in the U.K. Atmospheric Environment B (in press).Google Scholar
National Acid Precipitation Assessment Programme (NAPAP). 1990. Annual Report to the President and Congress 1989. Washington, USA.Google Scholar
North Atlantic Treaty Organisation (NATO/CCMS) 1985. Atmospheric measurements of air pollution — Pilot study on conservation and restoration of monuments (Aff/S 598–85, No. 158). NATO: Germany.Google Scholar
Novakov, T., Chang, S. G., & Harker, A. B., 1974. Sulphates as pollution particulates: Catalytic formation on carbon (soot) particles. Science 186, 259–61.Google Scholar
Olimsted, J., 1982. The atmospheric corrosion of aluminium. M.Sc Thesis, University of Manchester Institute of Science and Technology. (Unpublished).Google Scholar
Pallecchi, P., & Pinna, D., 1988. Alteration of stone caused by lichen growth in the Roman theatre of Fiesole (Firenze). In Proc. VIth Int. Cong, on Deterioration and Conservation of Stone, Torun, 1988, Volume II, pp. 39–47.Google Scholar
Passaglia, E., 1986. Economic Effects of Materials Degradation. In Materials Degradation Caused by Acid Rain, ACS Symposium Series 318, pp. 342–59, ed. Baboian, R. American Chemical Society.Google Scholar
Review Group on Acid Rain (RGAR) 1983. Acid deposition in the United Kingdom. Warren Spring Laboratory.Google Scholar
Review Group on Acid Rain (RGAR) 1987. Acid deposition in the United Kingdom. (2nd Report). Warren Spring Laboratory.Google Scholar
Robinson, G. C., 1982. Characterization of bricks and their resistance to deterioration mechanisms. In Conservation of Historic Stone Buildings and Monuments, pp. 145–162. Washington DC: National Academic Press.Google Scholar
Shrier, L. L., 1976. Corrosion. London: Butterworth.Google Scholar
Sinclair, J. D., & Weschler, C. J., 1986. Effects of Acid Rain on Indoor Zinc and Aluminium. In Materials Degradation Caused by Acid Rain, ACS Symposium Series 318, pp. 239–49, ed. Baboian, R., American Chemical Society.Google Scholar
Thomson, G., 1978. The Museum Environment. London: Butterworths.Google Scholar
Torraca, G., 1988. Air pollution and the conservation of building materials. Durability of Building Materials 5, 383–92.Google Scholar
Torraca, G., 1989. The application of science and technology to conservation practice. In Pre-printed Abstracts of the European Symposium on Science Technology and European Cultural Heritage, Bologna, 1989, pp. 52–4.Google Scholar
United Nations Economic Commission for Europe (UNECE). 1984. Air-borne sulphur pollution — Effects and control report prepared within the framework of the convention on long range transboundary air pollution. New York: United Nations.Google Scholar
Walton, J. R., Johnson, J. B., & Wood, G. C., 1982. Atmospheric corrosion initiation by sulphur dioxide and particulate matter. British Corrosion Journal 17, 59–64.CrossRefGoogle Scholar
Webster, R. P., & Kukacka, L. E., 1986. Effects of Acid Deposition on Portland Cement Concrete. In Materials Degradation Caused by Acid Rain, ACS Symposium Series 318, pp. 239–49, ed. Baboian, R., American Chemical Society.Google Scholar
Williams, R. S., 1986. Effects of Acid Rain on Painted Wood Surfaces: Importance of the Substrate. In Materials Degradation Caused by Acid Rain, ACS Symposium Series 318, pp. 310–31, ed. Baboian, R., American Chemical Society.CrossRefGoogle Scholar
Winkler, E. M., 1973. Stone: Properties, Durability in Man's Environment. Berlin and New York: Springer-Verlag.Google Scholar
Whalley, W. B., & McGreevy, J. P., 1985. Weathering. Progress in Physical Geography 1985, pp. 560–586.Google Scholar
Yocum, J. E., & Baer, N. S., 1984. Chapter E-7, section 7.1 in The Acidic Deposition Phenomenon and its Effects: Critical Assessment Review Papers, EPA Report 600/8–83–016BF. U.S. Environ. Prot. Agency, Washington D.C.Google Scholar