Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by
Crossref.
Inberg, Juha
Mattila, Jouni
and
Virvalo, Tapio
2002.
Harvester Boom Tip Acceleration Control During a Crosscutting – Theoretical Background.
International Journal of Forest Engineering,
Vol. 13,
Issue. 1,
p.
41.
Schkoda, Ryan
and
Crassidis, Agamemnon
2007.
Dynamic Inversion Control for Non-Square Systems with Application to Aircraft Longitudinal Control.
Westerberg, Simon
Manchester, Ian R.
Mettin, Uwe
La Hera, Pedro
and
Shiriaev, Anton
2008.
Virtual environment teleoperation of a hydraulic forestry crane.
p.
4049.
Löfgren, Björn
and
Wikander, Jan
2009.
Kinematic Control of Redundant Knuckle Booms.
International Journal of Forest Engineering,
Vol. 20,
Issue. 1,
p.
22.
Pedersen, Mikkel M.
Hansen, Michael R.
and
Ballebye, Morten
2010.
eveloping a Tool Point Control Scheme for a Hydraulic Crane Using Interactive Real-time Dynamic Simulation.
Modeling, Identification and Control: A Norwegian Research Bulletin,
Vol. 31,
Issue. 4,
p.
133.
Hansson, A.
and
Servin, M.
2010.
Semi-autonomous shared control of large-scale manipulator arms.
Control Engineering Practice,
Vol. 18,
Issue. 9,
p.
1069.
Kjelland, Magnus B
Tyapin, Ilya
Hovland, Geir
and
Hansen, Michael R
2012.
Tool-Point Control for a Redundant Heave Compensated Hydraulic Manipulator.
IFAC Proceedings Volumes,
Vol. 45,
Issue. 8,
p.
299.
Teav, Keov Kolyan
Zhou, Zhendong
and
Vucetic, Branka
2015.
Triangular MIMO Relay Channels: Simultaneous Signal and Interference Alignment.
IEEE Transactions on Vehicular Technology,
Vol. 64,
Issue. 1,
p.
223.
Koivumäki, Janne
and
Mattila, Jouni
2015.
High performance nonlinear motion/force controller design for redundant hydraulic construction crane automation.
Automation in Construction,
Vol. 51,
Issue. ,
p.
59.
Nurmi, Jarmo
and
Mattila, Jouni
2017.
Global energy-optimised redundancy resolution in hydraulic manipulators using dynamic programming.
Automation in Construction,
Vol. 73,
Issue. ,
p.
120.
Nurmi, Jarmo
and
Mattila, Jouni
2017.
Global Energy-Optimal Redundancy Resolution of Hydraulic Manipulators: Experimental Results for a Forestry Manipulator.
Energies,
Vol. 10,
Issue. 5,
p.
647.
Zheng, Shen
Ding, Ruqi
Zhang, Junhui
and
Xu, Bing
2021.
Global energy efficiency improvement of redundant hydraulic manipulator with dynamic programming.
Energy Conversion and Management,
Vol. 230,
Issue. ,
p.
113762.
Zhang, Zhijun
Zheng, Lunan
Chen, Zhuoming
Kong, Lingdong
and
Karimi, Hamid Reza
2021.
Mutual-Collision-Avoidance Scheme Synthesized by Neural Networks for Dual Redundant Robot Manipulators Executing Cooperative Tasks.
IEEE Transactions on Neural Networks and Learning Systems,
Vol. 32,
Issue. 3,
p.
1052.
Cheng, Min
Li, Linan
Ding, Ruqi
and
Xu, Bing
2021.
Real-Time Anti-Saturation Flow Optimization Algorithm of the Redundant Hydraulic Manipulator.
Actuators,
Vol. 10,
Issue. 1,
p.
11.
Dai, Ye
Xiang, Chaofang
Zhang, Yuan
Jiang, Yupeng
Qu, Wenyin
and
Zhang, Qihao
2022.
A Review of Spatial Robotic Arm Trajectory Planning.
Aerospace,
Vol. 9,
Issue. 7,
p.
361.