Today, robots can be found helping humans with their daily tasks. Some tasks require the robot to visit a set of locations in the environment efficiently, like in the Traveling Salesman Problem. As indoor environments are maze-like areas, feasible paths connecting locations must be computed beforehand, so they can be combined during the scheduling, which can be impracticable for real-time applications. This work presents an on-line Route Scheduling supported by a Fast Path Planning Method able to adjust pre-built paths. Experiments were carried out with virtual and real robots to evaluate time and quality of tours.

Modules are requisite for the realization of modular reconfigurable manipulators. The design of modules in literature mainly revolves around geometric aspects and features such as lengths, connectivity and adaptivity. Optimizing and designing the modules based on dynamic performance is considered as a challenge here. The present paper introduces an Architecture-Prominent-Sectioning (APS) strategy for the planning of architecture of modules such that a reconfigurable manipulator possesses minimal joint torques during its operations. Proposed here is the transferring of complete structure into an equivalent system, perform optimization and map the resulting arrangement into possible architecture. The strategy has been applied on a set of modular configurations considering three-primitive-paths. The possibility of getting advanced/complex shapes is also discussed to incorporate the idea of a modular library.

To improve the accessibility of robotics, we propose a design and fabrication strategy to build low-cost electromechanical systems for robotic devices. Our method, based on origami-inspired cut-and-fold and E-textiles techniques, aims at minimizing the resources for robot creation. Specifically, we explore techniques to create robots with the resources restricted to single-layer sheets (e.g., polyester film) and conductive sewing threads. To demonstrate our strategy’s feasibility, these techniques are successfully integrated into an electromechanical oscillator (about 0.40 USD), which can generate electrical oscillation under constant-current power and potentially be used as a simple robot controller in lieu of additional external electronics.

We propose a computational design tool to enable casual end-users to easily design, fabricate, and assemble flat-pack furniture with guaranteed manufacturability. Using our system, users select parameterized components from a library and constrain their dimensions. Then they abstractly specify connections among components to define the furniture. Once fabrication specifications (e.g., materials) designated, the mechanical implementation of the furniture is automatically handled by leveraging encoded domain expertise. Afterwards, the system outputs three-dimensional models for visualization and mechanical drawings for fabrication. We demonstrate the validity of our approach by designing, fabricating, and assembling a variety of flat-pack (scaled) furniture on demand.

We present extensions to ChainQueen, an open source, fully differentiable material point method simulator for soft robotics. Previous work established ChainQueen as a powerful tool for inference, control, and co-design for soft robotics. We detail enhancements to ChainQueen, allowing for more efficient simulation and optimization and expressive co-optimization over material properties and geometric parameters. We package our simulator extensions in an easy-to-use, modular application programming interface (API) with predefined observation models, controllers, actuators, optimizers, and geometric processing tools, making it simple to prototype complex experiments in 50 lines or fewer. We demonstrate the power of our simulator extensions in over nine simulated experiments.

In this paper, an overall structure with the asymmetric constrained controller is constructed for human–robot interaction in uncertain environments. The control structure consists of two decoupling loops. In the outer loop, a discrete output feedback adaptive dynamics programing (OPFB ADP) algorithm is proposed to deal with the problems of unknown environment dynamic and unobservable environment position. Besides, a discount factor is added to the discrete OPFB ADP algorithm to improve the convergence speed. In the inner loop, a constrained controller is developed on the basis of asymmetric barrier Lyapunov function, and a neural network method is applied to approximate the dynamic characteristics of the uncertain system model. By utilizing this controller, the robot can track the prescribed trajectory precisely within a security boundary. Simulation and experimental results demonstrate the effectiveness of the proposed controller.

Because of the increasing use of laparoscopic surgeries, robotic technologies have been developed to overcome the challenges these surgeries impose on surgeons. This paper presents an overview of the current state of surgical robots used in laparoscopic surgeries. Four main categories were discussed: handheld laparoscopic devices, laparoscope positioning robots, master–slave teleoperated systems with dedicated consoles, and robotic training systems. A generalized control block diagram is developed to demonstrate the general control scheme for each category of surgical robots. In order to review these robotic technologies, related published works were investigated and discussed. Detailed discussions and comparison tables are presented to compare their effectiveness in laparoscopic surgeries. Each of these technologies has proved to be beneficial in laparoscopic surgeries.

Aiming at problems of low optimization accuracy and slow convergence speed in the gait optimization algorithm of lower limb exoskeleton robot, a novel gait multi-objectives optimization strategy based on beetle swarm optimization (BSO)-elite opposition-based learning (EOL) levy flight foraging (LFF) algorithm was proposed. In order to avoid the algorithm from falling into the local optimum, the EOL strategy with global search capability, the LFF strategy with local search capability and the dynamic mutation strategy with high population diversity were introduced to improve optimization performance. The optimization was performed by establishing a multi-objectives optimization function with the robot’s gait zero moment point (ZMP) stability margin and driving energy consumption. The joint comparative tests were carried out in SolidWorks, ADAMS and MATLAB software. The simulation results showed that compared with the particle swarm optimization algorithm and the BSO algorithm, the ZMP stability margin obtained by the BSO-EOLLFF algorithm was increased, and the average driving energy consumption was reduced by 25.82% and 17.26%, respectively. The human-machine experiments were conducted to verify the effectiveness and superiority. The robot could realize stable and smooth walking with less energy consumption. This research will provide support for the application of exoskeleton robot.

Earth-contact mechanism (ECM), a type of mechanism to keep the system in contact with the earth and to move with the terrain changes. This paper uses the virtual equivalent parallel mechanism (VEPM) to convert the terrain data into the kinematical variables of the moving platform in the VEPM, and further analyzes the performance of the VEPM at each terrain point. Then, the comprehensive performance of the VEPM is chosen as the optimization goal, and a task-oriented dimensional optimization approach combined with the particle swarm algorithm and the neural network algorithm is proposed. This paper conducted a comparative experiment to verify the superiority of the new approach in optimizing the ECM’s comprehensive performance, whose performance analysis also can be applied into the layout design of the ECM. This paper proposed an analysis method to construct the ECM’s performance map based on the digital terrain map, which helps the control system and operator to make the optimal control decision.

Dielectric elastomers (DEs) find applications in many areas, particularly in the field of soft robotics. When modeling and simulating DE-based actuators and sensors, a substantial portion of the literature assumes the selected DE material to behave in some perfectly hyperelastic manner, and the vast majority have assumed invariant permittivity. However, studies on simple planar DEs have revealed instabilities and hastened breakdowns when a variable permittivity is allowed. This is partly due to the intertwined electromechanical properties of DEs rooted on their labyrinthine polymeric microstructures. This work focuses on studying the effects of a varying (with stretch) permittivity on the out-of-plane deformation of a circular DE, using a model derived from principles of strain-induced polymer birefringence. In addition, we utilize the Edward–Vilgis model, which attempts to account for effects related to crosslinking, and length extension, slippage, and entanglement of polymer chains. Our approach reveals the presence of “stagnation” regions in the electromechanical behavior of the DE actuator material. These stagnation regions are characterized by both electrical and mechanical critical electrostrictive coefficient ratios. Mechanically, certain values of the electrostrictive coefficient ratio predict cases where deformation does not occur in response to a change in voltage. Electrically, certain cases are predicted where changes in capacitance cannot be measured in response to changes in deformation. Thus, some combined conditions of loading and material properties could limit the effectiveness of DE membranes in either actuation or sensing. Therefore, our results reveal mechanisms that could be useful to designers of actuators and sensors and unveil an opportunity for exploring new theoretical materials with potential novel applications. Furthermore, since there are known analogous formulations between electrical and optical properties, criticality principles studied in this article could be extended to optomechanical coupling.

This paper proposes a tracking controller for the formation construction of multiple autonomous surface vessels (ASVs) in the presence of model uncertainties and external disturbances with output constraints. To design a formation control system, the leader-following strategy is adopted for each ASV. A symmetric barrier Lyapunov function (BLF), which advances to infinity when its arguments reach a finite limit, is applied to prevent the state variables from violating constraints. An adaptive-neural technique is employed to compensate uncertain parameters and unmodeled dynamics. To overcome the explosion of differentiation term problem, a first-order filter is proposed to realize the derivative of virtual variables in the dynamic surface control (DSC). To estimate the leader velocity in finite time, a high-gain observer is effectively employed. This approach is adopted to reveal all signals of the closed-loop system which are bounded, and the formation tracking errors are semi-globally finite-time uniformly bounded. The computer simulation results demonstrate the efficacy of this newly proposed formation controller for the autonomous surface vessels.

Robots with human-like appearances and structures are usually well accepted in the human–robot interaction. However, compared with human-like appearances and structures, the human-like motion plays a much more critical role in improving the efficiency and safety of the human–robot interaction. This paper develops a human-like motion planner based on human arm motion patterns (HAMPs) to fulfill the human–robot object handover tasks. First, a handover task is divided into two sub-tasks, that is, pick-up and delivery, and HAMPs are extracted for these two sub-tasks separately. The resulting HAMPs are analyzed, and a method is proposed to select HAMPs that can represent the characteristics of the human arm motion. Then the factors affecting the duration of the movement primitives are analyzed, and the relationship between the duration of the movement primitives and these factors is determined. Based on the selected HAMP and the computed duration of the movement primitives, a human-like motion planning framework is developed to generate the human-like motion for the robotic arms. Finally, this motion planner is verified by the human–robot handover experiments using a KUKA IIWA robot. It shows that the resulting trajectories can correctly reflect the relative relationship between the joints in the human arm motion and are very close to the recorded human arm trajectories. Furthermore, the proposed motion planning method is compared with the motion planning method based on minimum total potential energy. The results show that the proposed method can generate more human-like motion.

In order to make the designed ankle robotic system simpler, practical, and clinically oriented, we developed a novel $\underline{R}-2\underline{U}PS/RR$ ankle rehabilitation robot with a variety of training functions covering all the required ranges of motion of the ankle joint complex (AJC), where $U$ , $P$ , $S$ , and $R$ denote universal, prismatic, spherical, and revolute joints, respectively, and the underlined letter denotes the actuated joint. The robot was designed with three degrees of freedom (DOFs), with a series $R$ mechanism and a $2\underline{U}PS/RR$ parallel mechanism. The main advantage is that the height of the robot is very low, which is convenient for clinical use by patients. At first, the mechanism design and inverse solution of positions were introduced in detail. Then, the patient-passive exercise based on the predefined trajectory tracking and patient-active exercise based on the spring model were developed to satisfy different rehabilitation stages. Finally, experiments with healthy subjects were conducted to verify the effectiveness of the developed patient-passive and patient-active exercises of the developed ankle rehabilitation robot, with results compared with the existing ankle robotic system showing good trajectory tracking performance and interactive performance.

The coordinated motion between the press and the feeding mechanism directly determines the production efficiency of the high-speed stamping line. In order to generate the high-performance trajectory of the feeding mechanism, this paper investigates the optimization of the trajectory with the local variable period. Based on the quintic B-spline curve and normal distribution, the smooth interpolation method of variable-time interval is proposed to generate the collision-free and energy-jerk-minimal trajectory with variable-time intervals. The advantage of the proposed method is that it can make the feeding mechanism transition smoothly between districts of variable-time and fixed-time intervals. It is beneficial to avoid re-performing the entire process of trajectory planning. ADAMS and actual experiments are used to validate the effectiveness of the proposed method. Results show that the proposed method can maintain the high performance of the initial trajectory, and there is no sharp point in the displacement-time and velocity-time curves. The investigation provides a new direction for the direct generation of local variable-period trajectories in the multi-machine coordination of the stamping line.

Due to the efficient and flexible flight ability of bats, bat-like robots have become the focus of research in the field of bionic robots. Aerodynamic calculation is an important part of the research field of bat-like robot, which is the basis of the structure design and flight controller design of bat-like robot. However, due to the complex flight mechanism of bats, there is no mature theoretical method to calculate the flight aerodynamic force of bat-like robots. To solve this problem, this paper takes the membrane of a bat-like robot as the research object and analyzes in detail the effects of wing folding and unfolding and flexible deformation of the membrane on the chord length, passive torsion angle and relative velocity. Based on quasi-steady state model and blade element method, a set of aerodynamic calculation method for flexible deformed wing is established. In order to verify the effectiveness of the proposed method, the theoretical calculation results and the results of the fluid-structure interaction simulation are compared and analyzed under various working conditions. The two results are in good agreement under each working condition, and the errors are all within reasonable range, which proves the effectiveness of the method. This study can provide a theoretical basis for rational structure design and precise flight control of bat-like robot.

The lower extremity rehabilitation exoskeleton is mainly used to help patients with movement disorders complete rehabilitation training. For the human-machine interaction problem of the lower limb rehabilitation exoskeleton, a fuzzy radial-based impedance (RBF-FVI) controller is proposed in this study. A six degree of freedom (DOF) lower extremity rehabilitation exoskeleton was developed, and the human-machine coupling dynamics model was established. To realize the compliance control of the human-machine coupling system, a novel RBF-FVI controller is designed, which includes an inner-loop fuzzy position control module and an outer-loop impedance control module. The inner-loop fuzzy position control module is mainly used to achieve the tracking control of the desired training trajectory and position adjustment amount. The outer-loop impedance control module regulates the impedance parameters and compensates for the uncertainty terms. The superiority of the proposed controller in trajectory following is verified through simulation and comparison tests. The hardware test of the human-machine coupling system was carried out, and the test results showed that the subject and the exoskeleton system could realize a coordinated and smooth movement.

The given article emphasizes the development and modeling of a hybrid navigational controller to optimize the path length and time taken. The proposed navigational controller is developed by hybridizing the metaheuristic moth–flame optimization (MFO) approach and the reinforcement learning (RL) approach. Input parameters like obstacle and target locations are fed to the MFO controller that implements a proper navigational direction selection. It forwards to the RL controller, which exercises further refinement of the output turning angle around obstacles. The collaboration of the global MFO approach with the local-based RL approach helps to optimize the path traversed by the humanoid robot in an unknown environment. The major breakthrough in this article is the utilization of humanoid robots for navigation purposes between various checkpoints. The humanoid robots are placed in a cluttered environment and assigned specific target positions to complete the assigned tasks. In the case of a multi-humanoid robot system, to avoid self-collision, it requires a Petri-Net controller to be configured in the navigation system to prevent deadlock situations and enhance the smooth completion of tasks without inter-collision among the humanoid robots. Simulations and real-time experiments are undertaken using different controllers involving single- and multi-humanoid robot systems. The robustness of the proposed controller is also validated in dynamic environment. Comparisons are carried with an established navigational controller in a similar environmental setup, which proves the proposed hybrid controller to be robust and efficient.

In the control of space robots, flexible vibrations exist in the base, links and joints. When building a motion control scheme, the following three aspects should be considered: (1) the complexity in dynamic modeling; (2) the low accuracy of motion control and (3) the simultaneous suppression of multiple flexible vibrations. In this paper, we propose a motion vibration integrated saturation control scheme. First, the dynamic model of space robot with flexible-base, flexible-link and flexible-joint is established according to the assumed modes method and Lagrange equation. Second, singular perturbation theory is used to decompose the model into two subsystems: a slow subsystem containing the rigid motions of base and joints as well as the vibration of links, and a fast subsystem containing vibrations of base and joints. Third, an integrated sliding mode control with input restriction, output feedback and repetitive learning (ISMC-IOR) is designed, which can track the desired trajectories of base and joints with −3 orders of magnitude accuracy, while suppressing the multiple flexible vibrations of base, links and joints 50%–80% and 37% performance improvement over ISMC-IOR-NV were achieved. Finally, the algorithm is verified by simulations.

The repetitive motion planning movements of the redundant manipulator will cause oscillations and unintended swings of joints, which increase the risk of collisions between the manipulator and its surroundings. Motivated by this phenomenon, this paper presents an inverse kinematics algorithm for the spherical-revolute-spherical manipulator to solve the paradox raised by joint-drift and control the pose with no swing of the elbow. This algorithm takes the joint Cartesian positions set as the intermediary and divides the inverse solution process into two mapping processes within joint limits. Simulations are executed to evaluate this algorithm, and the results show this algorithm is applicable to repetitive motion planning and is capable of producing superior configurations based on its real-time ability and stable solve rate. Experiments using the 7-degree-of-freedom spherical-revolute-spherical manipulator demonstrate the effectiveness of this algorithm to remedy the joint-drift and elbow swing compared to Kinematics and Dynamics Library and TRAC-IK.