Hostname: page-component-78c5997874-v9fdk Total loading time: 0 Render date: 2024-11-04T15:54:08.591Z Has data issue: false hasContentIssue false

Structural and optical properties of Ag2S thin films prepared by spray pyrolysis*

Published online by Cambridge University Press:  15 April 1998

H. Dlala
Affiliation:
Laboratoire de Physique de la Matière Condensée, Faculté des Sciences de Tunis, Campus Universitaire, 2092 Tunis, Tunisia
M. Amlouk
Affiliation:
Laboratoire de Physique de la Matière Condensée, Faculté des Sciences de Tunis, Campus Universitaire, 2092 Tunis, Tunisia
S. Belgacem
Affiliation:
Laboratoire de Physique de la Matière Condensée, Faculté des Sciences de Tunis, Campus Universitaire, 2092 Tunis, Tunisia
P. Girard
Affiliation:
Laboratoire d'Analyse des Interfaces et de Nanophysique, Faculté des Sciences et Techniques de Montpellier, place Eugène Bataillon, 34095 Montpellier II Cedex 5, France
D. Barjon
Affiliation:
Laboratoire d'Analyse des Interfaces et de Nanophysique, Faculté des Sciences et Techniques de Montpellier, place Eugène Bataillon, 34095 Montpellier II Cedex 5, France
Get access

Abstract

Silver sulphide Ag2 S thin films have been prepared on pyrex glass substrates by the spray pyrolysis technique using silver acetate and thiourea as starting materials. The depositions were carried out in the range of substrate temperatures from 100 to 300 °C. Measurements of X-ray diffraction show that the deposited layers at 250 °C were well crystallized and oriented preferentially in the direction $(\bar{1}03)$. Films surfaces were analysed by contact Atomic Force Microscopy (AFM) in order to understand the effect of the deposited temperature on the surface structure. On the other hand, from transmission and reflection spectra, the band gap energy determined is about 1.14 eV. In the same way, an iterative method based on the optical reflectance and transmittance of Ag2S thin film prepared at 250 °C were used to obtain the refractive index and the extinction coefficient. Their values vary in the wavelength range 640-2200 nm from 2.38 to 2.81 and from 0.001 to 0.277 respectively.

Keywords

Type
Research Article
Copyright
© EDP Sciences, 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

* This paper was presented at the "Journées Maghrébines sur les sciences des matériaux" held at Hammamet, the 8, 9 and 10 November 1997.