Hostname: page-component-78c5997874-s2hrs Total loading time: 0 Render date: 2024-11-18T15:15:29.434Z Has data issue: false hasContentIssue false
  • English
  • Français

Transmission Electron Microscopy of Mocvd Titanium Nitride Films

Published online by Cambridge University Press:  25 February 2011

Toshio Itoh ,
Toyohiko J. Konno ,
Robert Sinclair ,
Ivo J.M.M. Raaijmakers  and
Bruce E. Roberts
Toshio Itoh
Affiliation:
Department of Materials Science and Engineering, Stanford University, Stanford, CA 94305
Toyohiko J. Konno
Affiliation:
Department of Materials Science and Engineering, Stanford University, Stanford, CA 94305
Robert Sinclair
Affiliation:
Department of Materials Science and Engineering, Stanford University, Stanford, CA 94305
Ivo J.M.M. Raaijmakers
Affiliation:
Novellus Systems Inc., San Jose, CA 95134
Bruce E. Roberts
Affiliation:
Novellus Systems Inc., San Jose, CA 95134
Get access

Abstract

The effect of substrate temperature and process pressure on microstructure of MOCVD-TiN films deposited on oxidized Si substrates are studied by transmission electron microscopy (TEM). It is found that microstructure of MOCVD-TiN films distinctly changes with these deposition parameters and that the resistivity of the films is uniquely related to the microstructure. Films with the lowest resistivity (< 500 μohm-cm) show a uniform semi-columnar grain structure. Films with the highest resistivity (> 10,000 μohm-cm) show a uniform equi-axed micrograin structure. The other films exhibit a bi-layer structure: one layer of semi-columnar grains and the other of equiaxed micrograins. The thickness ratio of these layers changes with the deposition conditions and the resistivity is a unique function of the thickness of the semi-columnar grain layer.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 337: Symposium B – Advanced Metallization for Devices and Circuits—Science, Technology and Manufacturing III , 1994 , 735
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1 Joshi, R.V. and Brodsky, S., Appl. Phys. Lett. 61, 2613 (1992).Google Scholar
2 Pintchovski, F. et al. , in Tungsten and Other Refractory Metals for VLSI Applications TV, edited by Blewer, R.S. and McConica, C.M. (Mater. Res. Soc., Pittsburgh, PA, 1989), p. 275 Google Scholar
3 Raaijmakers, IJ. et al. , in Advanced Metallization and Processing for Semiconductor Devices and Circuits II, edited by Katz, A. et al. (Mater. Res. Soc. Symp. Proc. 260, Pittsburgh, PA, 1992) pp. 99–105.Google Scholar
4 Raaijmakers, I.J. et al. , Proc. 9th Int. IEEE VLSI Multilevel Interconnection Conf., Santa Clara 1992 (IEEE, New York, 1992) p. 260 Google Scholar
5 Raaijmakers, I.J. and Ellwanger, R.C., Proc. Conf. Advanced Metallization for ULSI Applications (Mater. Res. Soc. Pittsburgh, PA, 1993) p. 325.Google Scholar
6 Fix, R.M. et al. , Chem. Mater. 2, 235 (1990).Google Scholar
7 Bravman, J.C. and Sinclair, R., J. Electron Microscopy Technique 1, 53 (1984).Google Scholar
8 Ohring, M., The Materials Science of Thin Films (Academic Press, San Diego, CA, 1992) p. 175 Google Scholar
9 Wittmer, M., J. Vac. Sci. Technol. A 3, 1797 (1985)Google Scholar